Key Parameters Category Description / Value Product Line Eaton Inductive Proximity Sensors Housing Diameter 22 mm Sensing Distance Typically 5 mm (for M22 series) Mounting Shielded (Flush-mountable) Output Configuration PNP (Sourcing output) Output State Normally Open Connection Pre-wired cable Rated Operating Voltage 10-30 V DC Housing Material Nickel-plated brass Protection Rating IP67

Key Parameters Category Description / Value Product Line Eaton Inductive Proximity Sensors Housing Diameter 22 mm Sensor Type Inductive (detects metallic objects) Sensing Distance A common standard sensing distance for M22 sensors is 5 mm or 8 mm. The exact value for the KC01 variant must be confirmed from the datasheet. Mounting Typically available in both Shielded (Flush-mountable) and Non-shielded (Non-flush) versions. The KC01 code specifies which type. Output Configuration Typically available in PNP (Sourcing) or NPN (Sinking), and Normally Open (NO) or Normally Closed (NC). The KC01 code specifies the exact configuration. Connection Typically available with pre-wired cable or connector (e.g., M12). The KC01 code specifies the connection type. Rated Operating Voltage Typically 10-30 V DC Housing Material Nickel-plated brass or Stainless Steel Protection Rating Typically IP67

Key Parameters Category Description / Value Product Line Eaton Inductive Proximity Sensors Housing Diameter 22 mm Sensor Type Inductive (detects metallic objects) Sensing Distance Common M22 sensing distances are 5 mm or 8 mm (exact value for A4 variant requires datasheet verification) Output Configuration Available in both PNP and NPN versions (specific type for A4 requires datasheet verification) Connection Method Typically pre-wired cable or connector (specific connection for A4 requires datasheet verification) Rated Operating Voltage 10-30 V DC Housing Material Nickel-plated brass or stainless steel Protection Rating IP67 (standard for industrial sensors) Mounting Threaded barrel M22 x 1.0

Key Parameters Category Description / Value Product Line Eaton DMV (Contactor Relays) Model / Frame Size DMV400 Main Contacts 4 Poles Contact Configuration 4 Normally Open (NO) (as indicated by "4F") Rated Operational Current (Iₑ) For control loads, typically up to 10 A (at 240V AC) or similar, depending on the utilization category. Rated Thermal Current (Iᵼₕ) 20 A Rated Operational Voltage (Uₑ) Up to 690 V AC, 250 V DC Coil Control Voltage DC - The specific voltage (e.g., 24V, 48V, 110V DC) must be confirmed by the order code sticker on the device itself. The "CD" suffix is consistent with a DC coil. Utilization Categories AC-15: Control of electromagnetic loads (>72 VA) DC-13: Control of electromagnetic loads Electrical Durability Millions of operations (dependent on load) Mechanical Durability ~ 10 - 30 million operations Standards Compliance IEC/EN 60947-5-1 Mounting Snap-on mounting on 35 mm top-hat rail (DIN rail). Connection Cage Clamp terminal technology for easy wiring. Auxiliary Contacts Can typically be expanded with add-on auxiliary contact blocks (e.g., normally open or normally closed).

Key Parameters Category Description / Value Product Line Eaton DMV (Contactor Relays) Model / Frame Size DMV400 Main Contacts 4 Poles Contact Configuration 4 Normally Open (NO) (as indicated by "4F") Rated Operational Current (Iₑ) For control loads, typically up to 10 A (at 240V AC) or similar, depending on the utilization category. Rated Thermal Current (Iᵼₕ) 20 A Rated Operational Voltage (Uₑ) Up to 690 V AC, 250 V DC Coil Control Voltage DC - The specific voltage (e.g., 24V, 48V, 110V DC) must be confirmed by the order code sticker on the device itself. The "CD" suffix is consistent with a DC coil. Utilization Categories AC-15: Control of electromagnetic loads (>72 VA) DC-13: Control of electromagnetic loads Electrical Durability Millions of operations (dependent on load) Mechanical Durability ~ 10 - 30 million operations Standards Compliance IEC/EN 60947-5-1 Mounting Snap-on mounting on 35 mm top-hat rail (DIN rail). Connection Cage Clamp terminal technology for easy wiring. Auxiliary Contacts Can typically be expanded with add-on auxiliary contact blocks (e.g., normally open or normally closed).

Key Parameters Category Description / Value Product Line Eaton DMV (Contactor Relays) Model / Frame Size DMV1000 Main Contacts 3 Poles Contact Configuration 3 Changeover Contacts (Form Z, 1 NO + 1 NC per pole) Rated Operational Current (Iₑ) For control loads, typically up to 20 A (at 240V AC) depending on utilization category Rated Thermal Current (Iᵼₕ) 40 A Rated Operational Voltage (Uₑ) Up to 690 V AC, 250 V DC Coil Control Voltage DC - Specific voltage (24V, 48V, 110V DC etc.) must be verified from device label Utilization Categories AC-15: Control of electromagnetic loads (>72 VA) DC-13: Control of electromagnetic loads Electrical Durability Millions of operations (load dependent) Mechanical Durability ~ 10-30 million operations Standards Compliance IEC/EN 60947-5-1 Mounting Snap-on mounting on 35 mm top-hat rail (DIN rail) Connection Cage Clamp terminal technology

Key Parameters Category Description / Value Product Line Eaton DMV (Contactor Relays) Model / Frame Size DMV630 Main Contacts 3 Poles Contact Configuration 3 Changeover Contacts (Form Z, 1 NO + 1 NC per pole) Rated Operational Current (Iₑ) For control loads, typically up to 12 A (at 240V AC) depending on utilization category Rated Thermal Current (Iᵼₕ) 25 A Rated Operational Voltage (Uₑ) Up to 690 V AC, 250 V DC Coil Control Voltage DC - Specific voltage (24V, 48V, 110V DC etc.) must be verified from device label Utilization Categories AC-15: Control of electromagnetic loads (>72 VA) DC-13: Control of electromagnetic loads Electrical Durability Millions of operations (load dependent) Mechanical Durability ~ 10-30 million operations Standards Compliance IEC/EN 60947-5-1 Mounting Snap-on mounting on 35 mm top-hat rail (DIN rail) Connection Cage Clamp terminal technology

Key Parameters Category Description / Value Product Line Eaton DILM Model / Frame Size DILM300A Rated Operational Current (Iₑ) at AC-3 300 A (For squirrel-cage motors: Starting, switching off during running) Rated Operational Power at AC-3 ~ 160 kW / 220 HP at 400V 50Hz Rated Operational Voltage (Uₑ) Up to 1000 V AC, 50/60 Hz Rated Thermal Current (Iᵼₕ) 410 A Poles 3 (Main Contacts) Coil Control Voltage 220-240 V AC, 50/60 Hz (As explicitly specified) Utilization Categories AC-3: Squirrel-cage motors (starting, switching off during running) AC-1: Non-inductive or slightly inductive loads (e.g., heaters) Electrical Durability Hundreds of thousands of operations (dependent on load) Mechanical Durability Millions of operations Arc Extinction System Sintered metal arc chute (as indicated by "S") Standard Auxiliary Contacts 2 normally open (NO) contacts (as indicated by "/22") Standards Compliance IEC/EN 60947-4-1, UL 508, CSA C22.2 No. 14 Mounting Screw mounting via integrated feet or mounting plate. Connection Large screw terminals for main power connections and cage clamp terminals for auxiliary contacts and coil.

Key Parameters Category Description / Value Product Line Eaton Power Xpert DG1 Model / Hardware DG1-34031FB Firmware / Application Code C54C (Feeder Protection) Key Protection Functions • Overcurrent (50/51, 50N/51N) • Ground Fault (50G/51G) • Negative Sequence / Unbalance (46) • Thermal Overload (49) • Under/Over Voltage (27/59) • Under/Over Frequency (81O/81U) • Reclosing (79) Inputs / Outputs (I/O) Multiple programmable digital inputs, relay (form-C) outputs, and analog inputs. The exact count is defined by the hardware code "34031FB". Metering & Monitoring Measures and displays Volts, Amps, Power (kW, kVAR, kVA), Power Factor, Frequency, Energy, etc. Communication Protocols Typically supports Modbus RTU over RS485 as standard. Other protocols like DNP3 or Ethernet may be available as options. Power Supply Common ratings are 24-48 V DC or 100-240 V AC/DC (The exact specification must be verified from the device nameplate and datasheet). Display Graphical or alphanumeric LCD display for status, measurements, and event logs. Standards Compliance IEC 60255, ANSI C37.90 Mounting Panel-mounted via a cutout, typically for a standard 19-inch rack or panel door.

Key Parameters Category Description / Value Product Line Eaton DILM Model / Frame Size DILM400 Rated Operational Current (Iₑ) at AC-3 400 A (For squirrel-cage motors) Rated Operational Power at AC-3 ~ 200 kW / 268 HP at 400V 50Hz Rated Operational Voltage (Uₑ) Up to 1000 V AC, 50/60 Hz Rated Thermal Current (Iᵼₕ) 475 A Poles 3 (Main Contacts) Coil Control Voltage Standard factory setting is often 400V/500V AC. However, this is configurable. The exact voltage must be confirmed by the order code sticker on the device itself. Utilization Categories AC-3: Squirrel-cage motors AC-1: Non-inductive loads Standard Auxiliary Contacts 2 normally open (NO) contacts (as indicated by "/22") Integrated Adapter RA250 adapter pre-mounted, enabling quick installation of RCU250 modules. Electrical Durability Hundreds of thousands of operations (load-dependent) Mechanical Durability Millions of operations Standards Compliance IEC/EN 60947-4-1, UL 508, CSA C22.2 No. 14 Mounting Screw mounting via integrated feet or mounting plate. Connection Large screw terminals for main power connections.