Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC FOXBORO GE HIMA Honey Well ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW TRICONEX Schenider Weidmueller Mitsubishi SICK FISHER
home
___FISHER
19A2542X012
Key Specifications / Parameters Part Number: 19A2542X012 Product Type: Gasket / gasket‑sealing element Approximate Dimensions: ~1.72 in × 2.22 in × 0.03 in (approximately 43.7 mm × 56.4 mm × 0.76 mm) as indicated in parts listing. Application: Used in Fisher valve body/bonnet interface assemblies (for certain valve sizes in the EH series) Material: Typically a flat gasket material, likely metal or compressible sheet type per valve manufacturer standard (exact compound not specified in the listing) Typical Usage: Spare part for maintenance/repair of Fisher valves, may be associated with NPS 2, CL intermediate assemblies (as per export listing)

More details >> Request a Quote >>
___FISHER
2N126902202
Key Specifications / Parameters Part Number: 2N126902202 Product Type: Diaphragm for pneumatic actuator (Type 657, Size 70) Material: Nitrile elastomer (commonly called NBR) Actuator Size Compatibility: Size 70 (also referred to the Type 657 actuator, size “70/87”) Physical Size: Approximate diameter 21‑1/8 inches (~537 mm) with 28 mounting holes (per aftermarket listing) Application: Replacement part for Fisher Size 70 pneumatic actuator units in industrial valve assemblies Status: Listed as replacement/aftermarket part and may support legacy builds

More details >> Request a Quote >>
___FISHER
24494T001
Key Specifications / Parameters Parameter Description / Value Part Number 24494T001 Product Type Packing kit, coil‑spring loaded Packing Material PTFE (polytetrafluoroethylene) Packing Design Coil spring‑loaded assembly, with spacer to establish height Application Re‑packing the stem passage/stuffing‑box in sliding‑stem valves Intended Benefit Maintains compression of packing under thermal cycles, wear

More details >> Request a Quote >>
___FISHER
FISHER 3722
Key Specifications / Parameters Parameter Detail Model 3722 Function Electro‑pneumatic converter (4‑20 mA → pneumatic) Input Signal Standard: 4‑20 mA DC (with maximum compliance ≤ 30 VDC) Pneumatic Output Signal 0.2 to 1.0 bar (3 to 15 psig) typically Supply (Pneumatic) Pressure Up to ~10.3 bar (150 psig) or maximum pressure rating of actuator, whichever is lower Operating Temperature Standard ambient; versions with hazardous‑area approvals rated for about –40 °C to +82 °C Hazardous‑Area Ratings Certified for ATEX, FM, CSA, IECEx depending on build Mounting Mounts on the base of the 3710 pneumatic positioner Materials Case and internal parts built for industrial service, resistant to environment and vibration Usage/Application For precise valve positioning in process control systems (pneumatic actuator + positioner combo)

More details >> Request a Quote >>
___FISHER
FISHER 3700
Key Specifications / Parameters Parameter Detail Model 3700 Mounting Type Wall‑mount, single‑hole installation Outlet/Stem Swivel outlet and swivel stem for flexible orientation Handle Type Lever handle Material Brass body (chrome or other finish variant) Connection Inlet ½″ female inlet (typical variant) Weight Approximately ~1.75 lbs (~0.8 kg) (typical) Typical Use Commercial plumbing, foodservice, utility sink or appliance inlet

More details >> Request a Quote >>
___FISHER
RPACKX00062
Key Specifications / Parameters Part Number: RPACKX00062 Stem Size (Nominal): ¾ inch (~19.1 mm) Boss (Yoke Boss / Packing Bore) Size: ~3‑9/16 inch (~90.5 mm) Packing Type: Double PTFE (V‑ring style) packing system Kit Contents: Packing rings, box ring, upper wiper, lantern ring Material: PTFE for packing rings; metal parts for wiper and lantern ring Application: Maintenance of sliding-stem valves to restore proper stem sealing

More details >> Request a Quote >>
___FISHER
RPACKX00052
Key Specifications / Parameters Parameter Description / Value Part Number RPACKX00052 Stem Diameter (Nominal) ½ inch (12.7 mm) Packing Type Double PTFE V‑ring packing Material PTFE (polytetrafluoroethylene) Compatible Boss/Yoke Diameter Yoke boss approx 2‑13/16 inch (≈71 mm) Max. Service Temperature* Approximately 450 °F (≈232 °C) Application Packing kit for stem sealing in sliding‑stem valves with ½″ stem size

More details >> Request a Quote >>
___FISHER
RPACKX00042
Key Specifications / Parameters Parameter Description / Value Part Number RPACKX00042 Packing Type Double PTFE V‑ring assembly Compatible Stem Diameter ⅜″ (9.5 mm) Material PTFE (TFE) V‑ring packing rings Kit Contents Packing rings, upper wiper, packing box ring, lantern ring (and an extra packing ring in kit) Application Stem sealing/packing replacement in Fisher sliding‑stem control valves Additional Notes The installation instructions note the kit “contains one extra packing ring (key 7)” which is to be discarded during assembly.

More details >> Request a Quote >>
___FISHER
RPACKX00542
Key Specifications / Parameters Parameter Description / Value Part Number RPACKX00542 Stem Size (Nominal) 1¼ inch (1.25 in) Packing Type Single graphite ribbon + graphite filament packing Material Graphite ribbon/filament (low‑chloride, high‑temperature capable) Application Repair/overhaul of valve stem packing for sliding‑stem valves Kit Contents Includes the necessary rings: graphite filament rings, graphite ribbon rings, packing box ring, gland follower and associated hardware

More details >> Request a Quote >>
___FISHER
RPACKX00532
Key Specifications / Parameters Parameter Description / Value Part Number RPACKX00532 Stem Size (Nominal) 1 inch (25.4 mm) Packing Type Single graphite ribbon + graphite filament packing Material Graphite ribbon/filament (low‑chloride, high temperature‑capable) Kit Contents Includes multiple rings: e.g., braided graphite rings, laminate graphite rings, packing box ring, gland follower, gland flange, gland studs/nuts (per instruction sheet) Application Repair/overhaul of valve stem packing for sliding‑stem valves Installation Note Designed for a specific boss (yoke boss) diameter and gland assembly; typically requires correct clearance, stem finish and follower torque for proper sealing Related Documentation Installation instructions available for RPACKX00532 listing rings and filler stack for 1” stem size

More details >> Request a Quote >>
1 2
···
236 237 238 239 240 241 242
···
5802 5803
Related products
ABB DSTD108L: High-Performance Connection Unit for Industrial Automation -

The ABB DSTD108L is a specialized connection unit designed for seamless integration into industrial automation systems, offering enhanced reliability and efficiency.
PFEA112-60
Key Features & Benefits
High-Capacity Power Conditioning

60V DC output (FOUNDATION Fieldbus compliant)

500mA current capacity (field side)

2000V DC galvanic isolation

Advanced Protection

Instantaneous short-circuit protection (<1μs)

Overvoltage and reverse polarity protection

8kV surge protection (ANSI/IEEE C62.41)

Industrial-Grade Construction

-40°C to +85°C operating range

IP66-rated aluminum enclosure

DIN-rail or panel mounting options

Smart Diagnostics

LED status indicators (power/segment health)

Remote monitoring capability

Predictive failure detection

Technical Specifications
Parameter Specification
Input Voltage 24V DC (18-32V range)
Output Voltage 60V DC (±1%)
Maximum Current 500mA continuous
Isolation 2000V DC (input-to-output)
Response Time <1μs (short-circuit)
Certifications ATEX, IECEx, UL, CSA, SIL2
Typical Applications
✔ Oil & gas production facilities
✔ Chemical processing plants
✔ Power generation systems
✔ Pharmaceutical manufacturing
✔ Water treatment automation
SIEMENS 6ES7467-5GJ02-0AB0 INTERFACE MODULE -

The SIEMENS 6ES7467-5GJ02-0AB0 Interface Module offers seamless integration and enhanced connectivity for industrial automation systems, providing reliable communication between devices and facilitating efficient data exchange.