Key Specifications / Parameters Parameter Description / Value Part Number RPACKX00102 Stem Size (Nominal) ⅜″ (9.5 mm) Packing Type Single graphite ribbon + graphite filament packing Material Graphite ribbon/filament Included Components Graphite filament ring, graphite ribbon ring, lantern ring, packing box ring, packing follower Special Requirement Use one sacrificial zinc washer (0.004″ / 0.102 mm) beneath each graphite ribbon ring Application Valve stem sealing in sliding‑stem valves

Typical Technical Parameters Parameter Specification / Note Product Line FIELDVUE DVC6200 Assembly Model 1E9447X0112 Input Signal 4-20 mA HART or Foundation Fieldbus (Specific type defined by full order code) Supply Air Pressure 20 to 150 psi (1.4 to 10.3 bar) - Actuator Dependent Air Consumption Very low quiescent flow Enclosure Rating NEMA 4X (IP66/67) Ambient Temperature -40° to 185°F (-40° to 85°C) Travel Range Actuator Dependent. Defined by the specific actuator in the assembly. Valve Shutoff Rating Valve Dependent. Defined by the specific valve body included in the assembly. Mounting Directly on linear or rotary actuators (Pre-assembled unit)

Key Specifications / Parameters Specification Value / Description Product Series Fisher LOC 105 locking/switching valve module Function Provides switching or locking actuation in a control valve or regulator system (e.g., hold position, switch flow path) Typical Use Pneumatic control systems, regulators, pilot modules where lock/switch functionality is required Maximum Supply Pressure Around 125 psi for certain LOC 105‑labeled models (for example switching valve models) Operating Spring Range Some units show spring ranges such as 40‑90 psi for actuation control Ports / Connections Often ¼ in NPT pilot/control ports (varies by specific variant) Application Size Range Modular accessory — size depends on main valve/regulator it’s paired with Materials Standard industrial materials for valve modules (body, pilot, actuator)

Key Specifications / Parameters Product Series: CSB400 Series Pressure Reducing Regulators Model: CSB424‑IN Operating Principle: Direct‑acting, spring‑loaded regulator Body Sizes & End Connections: Multiple options including NPT, Rp (gas thread), ANSI flanged (CL 125 FF / CL 150 FF), PN‑rated, depending on model build Maximum Operating Inlet Pressure: Up to ~16 bar (232 psig) for certain builds; emergency rating ~20 bar (290 psig) for some builds Outlet Pressure Range (typical): From ~17 mbar (≈6.8 in w.c.) up to ~3.0 bar (≈43.5 psig) for standard models Operating Temperature Range: Standard −20 °C to +66 °C (−4 °F to +150 °F); Some low‐temperature versions go down to −30 °C (−22 °F) Materials: Bodies available in ductile cast iron and WCC steel; other internals include various alloys and elastomers depending on service Pressure Registration Options: Internal, external or dual registration of downstream pressure; variants include integrated monitor or slam‑shut modules for overpressure protection Typical Applications: Gas pressure reducing stations, commercial/industrial gas service, where stable downstream pressure and safety is required

Typical Technical Parameters Parameter Specification / Note Product Line Fisher Control-Scan CS400 Model CS400IN-8E Input Type Single-channel, Analog Input Input Signal 4-20 mA DC (Two-wire transmitter loop) Number of Channels 1 System Communication Proprietary Control-Scan network protocol via the CS400 baseplate. Power Supply Powered by the CS400 baseplate (typically 24 VDC). Isolation Channel-to-system isolation (typical for such modules). Operating Temperature 0 to 60 °C (32 to 140 °F) - for standard industrial environments. Mounting Plugs into a dedicated CS400 baseplate/rack.

Typical Technical Parameters Parameter Specification / Note Model Type LOC477 Valve Size Common sizes include 2 inch, 3 inch, and 4 inch (Depending on specific order code) Pressure Rating Typically Class 125 or Class 150 End Connections Flanged (Standard) Body Material Cast Iron (Standard for water and oil services), Ductile Iron, Bronze, or Cast Steel available. Trim Material Bronze or Stainless Steel Float Material Copper or Stainless Steel Operating Pressure Varies with size and body material; typically up to 250-400 psi for cast iron. Leverage Ratio Available in different ratios (e.g., 1:1, 2:1) to provide the required force for valve operation against line pressure. Application Level control in storage tanks, water supply tanks, reservoirs, and similar vessels.

Typical Technical Parameters Parameter Specification / Note Product Line FIELDVUE DVC2000 Assembly Model FV-4112 Core Instrument DVC2000 Digital Valve Controller Actuator Fisher 1061 Series Diaphragm Actuator Input Signal 4-20 mA DC, with HART 5/7 protocol Supply Air Pressure Actuator Dependent. Common range for the 1061 actuator is up to 150 psig (10.3 bar). Air Consumption (Quiescent) Typically < 0.2 SCFM (0.34 Nm³/hr) Enclosure Rating NEMA 4X (IP66) Actuator Action Spring-to-Close / Air-to-Open (Typically for FV-4112). Can often be converted to the opposite action in the field. Valve Stem Travel Actuator Dependent. The specific travel (e.g., 3/4 inch, 1.5 inch) is defined by the exact 1061 actuator model in the assembly. Mounting The assembly is designed for direct mounting onto a compatible control valve body.

Key Specifications / Parameters Specification Detail Valve Series / Model Fisher GX Control Valve & Actuator System Valve Size NPS 1 (nominal 1‑inch) Pressure Class / Rating ASME Class 300 (flanged body, sliding‑stem) End Connections Raised‑face flanged per ASME B16.5 (for NPS 1, Class 300 builds) Flow Characteristics Equal‑percentage or linear trim options Shut‑off Capability Metal‑to‑metal seat standard (Class IV); optional upgrades (Class V) and soft‑seat (Class VI) Body / Bonnet Materials Standard carbon steel or stainless steel; alloy materials available Trim / Seat Options Metal‑hard faced, soft‑seat PTFE, low‑flow/micro‑flow trims Service Conditions General service, corrosive service, low‑flow, noise/cavitation mitigation Actuator & Accessories Multi‑spring pneumatic actuator integrated; digital valve controller optional Face‑to‑Face / Size Range Size range includes NPS ½ through NPS 6; dimensions align with standards

Key Specifications / Parameters Specification Detail Valve Series / Model Fisher GX Control Valve & Actuator System Actuator Size 750 (larger multi‑spring pneumatic actuator in the GX family) Valve Body Sizes DN 15 to DN 150 (NPS ½ to NPS 6) Pressure/Rating Up to ~51.7 bar (750 psig) for many GX versions (with proper actuator) End Connections Flanged; EN: PN 10/16/25/40; ASME: Class 150/300 Flow Characteristics Equal percentage or linear; special trims for noise & cavitation Shut‑off Capability Metal‐to‐metal seats standard (Class IV); optional Class V or soft‑seat Class VI Materials of Construction Carbon steel, stainless steel, duplex/alloy options; full trim options Service Conditions Supported General service, corrosive, low‑flow, cavitation/noise mitigation Actuator Air Supply Typical 4.0‑6.0 bar (58‑87 psig); optional lower ranges supported Maintenance / Features Replaceable trim, live‑loaded packing, large common parts across sizes

Key Specifications / Parameters Specification Value / Description Product Name & Series Fisher GX Control Valve, Actuator size 225 Valve Type Sliding‑stem globe style control valve with matched pneumatic diaphragm actuator Actuator Size 225 (refers to the multi‑spring actuator model) Flow Characteristics Equal‑percentage or linear trim options Pressure Class / Rating Body pressure ratings follow GX series: up to ASME Class 300 / EN PN 25/40 (depending on body material and size) Sizes / Port Diameters GX series covers a range: e.g., DN15 to DN150 / NPS ½ to NPS 6; the 225 actuator is typically used for smaller to mid‑sizes Materials of Construction Body/bonnet options: carbon steel, stainless steel, duplex/alloy; trim selections include metal‑to‑metal or soft seat configurations Actuator Supply / Ambient Pneumatic actuator air supply pressures typically 4.0 to 6.0 bar (58–87 psig) for full capabilities; ambient temperature down to –46 °C (‑50 °F) standard, optional down to –60 °C (‑76 °F) Service Conditions General service (liquid/gas/vapor), corrosive service, low‑flow, noise/cavitation mitigation; modular trim availability Installation / Connections Flanged, welded, or threaded ends (depending on size and standard)