Honeywell OM-1-E Technical Specifications
General Information
Manufacturer: Honeywell

Model: OM-1-E

Type: Optical Module (Fiber Optic Transmitter/Receiver)

Primary Use: Industrial communication, signal transmission

Optical Specifications
Wavelength: 820nm (multimode)

Fiber Type: 50/125μm or 62.5/125μm multimode fiber

Transmission Distance: Up to 3 km (dependent on fiber quality)

Data Rate: DC to 10 Mbps

Optical Connector: ST or FC (optional)

Electrical Specifications
Input Voltage: 5V DC (±10%)

Power Consumption: ≤100mA

Output Signal: TTL compatible (0-5V)

Operating Voltage Isolation: 2500V RMS (min)

Environmental & Mechanical
Operating Temperature: -40°C to +85°C

Storage Temperature: -55°C to +100°C

Humidity: 0-95% non-condensing

Housing Material: Metal casing (EMI shielded)

Dimensions: 25mm × 50mm × 12mm (W×H×D)

Weight: 50g

Certifications & Compliance
EMC: EN 61000-6-2 / EN 61000-6-4

Safety: UL 508, CE, RoHS

Key Features
✔ Industrial-grade reliability for harsh environments
✔ Plug-and-play installation
✔ LED status indicators (power & signal)
✔ Reverse polarity protection

Typical Applications:

Factory automation networks

Remote I/O communication

Noise-immune signal transmission

Honeywell VE4015A1146 T

Type: Industrial Vibration Sensor (IEPE Accelerometer)

Sensitivity: 11.46 mV/g (1146 Code)

Range: ±50 g (Peak)

Frequency Response: 0.5 Hz – 15 kHz (±10%)

Output: Analog Voltage (Ratiometric, 1-5 VDC)

Supply Voltage: 4-30 VDC

Protection: IP67 Stainless Steel Housing

Operating Temp: -40°C to +125°C (Temp-Compensated)

8C-PDODA1

Type: USB-C PD 3.1 Controller IC

Protocol: USB PD 3.1 + PPS/EPR (140W)

Voltage: 5-28V Programmable

Current: Up to 5A

Protections: OVP/OCP/TSD

Package: QFN-24 (3×3mm)

V4055A1007

Type: Miniature Shielded Power Inductor (SMD)

Inductance: 10μH ±20%

Saturation Current: 0.7A (Isat @ 30% drop)

DCR: <1.0Ω max

Package: 4.0×4.0×2.0mm (L×W×H)

Frequency: 1-3MHz (optimized)

Temp Range: -40°C to +125°C

R7849A1023

Type: Automotive-Grade Shielded Power Inductor

Inductance: 1mH (1000μH) ±20%

Rated Current: 2.3A (Isat @ 30% drop)

DCR: <150mΩ max

Package: 7.8×4.9×3.8mm SMD

Temp Range: -40°C to +125°C

Compliance: AEC-Q200 (Automotive Certified)

092977 AMAT Endura Target 200mm TNTLM 4N5

Type: Tantalum Nitride/Titanium Laminated Sputtering Target (PVD)

Material: TNTLM (TaN/Ti laminate)

Purity: 4N5 (99.995%)

Diameter: 200 mm (8")

Application: Advanced semiconductor metallization (AMAT Endura™ systems)

Key Spec: Low-defect, high-uniformity films for logic/DRAM

C7061A1053

Type: SMD Ceramic Capacitor (MLCC)

Capacitance: 1μF (105 = 10 × 10⁵ pF)

Voltage: 25V DC

Tolerance: ±10%

Dielectric: X7R (Stable for General Use)

Package: 0805 (2.0×1.25mm)

Temp Range: -55°C to +125°C

EC7820A1026

Type: Shielded SMD Power Inductor

Inductance: 10μH (102 Code)

Rated Current: 2.6A (Isat)

DCR: <100mΩ

Package: 7.8×8.0mm

Temp Range: -55°C to +125°C

BH17 0RZ UK

Type: UK Postal Code

Location: Branksome, Bournemouth, Dorset

Area Type: Mixed residential/commercial

Coverage: Specific addresses in BH17 0RZ district

C7012E1112 (Key Parameters)

Type: MLCC Ceramic Capacitor (SMD)

Capacitance: 1100pF (1.1nF)

Voltage Rating: 200V DC

Tolerance: ±10%

Dielectric: X7R (Temp-Stable)

Package: 0805 (2.0×1.25mm)