Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC FOXBORO GE HIMA Honey Well ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW TRICONEX Schenider Weidmueller Mitsubishi SICK FISHER
home
EATON
DE1-124D3NN-N20N
Category Parameter Specification / Typical Value General Characteristics Module Type Digital Input (DI) Number of Channels 8 channels (Higher density is typical for D3 code) Connection Technology M12 Connectors (likely multi-port) Input Characteristics Input Voltage 24 V DC (Nominal) Input Type Sourcing (PNP) / High-side switching "1" Signal Level Typically 15...30 V DC "0" Signal Level Typically -3...5 V DC Input Current per Channel Typically 2...5 mA Filter Time Configurable (e.g., 0.1/0.5/1/3 ms) Electrical Isolation Channel-to-Channel Yes, typically in groups Channel-to-Bus Yes Performance Update Time < 1 ms per channel (typical) Status Indication LED per channel (for input status) General Data Backplane Bus Proprietary (for XSystem platform) Supply Voltage (from backplane) 24 V DC Operating Temperature 0 °C to +55 °C Protection Rating (with connector) IP67 Standards IEC 61131-2, UL 508

More details >> Request a Quote >>
EATON
DE1-342D1FN-N20N
Category Parameter Specification / Typical Value General Characteristics Module Type Digital Input (DI) with Diagnostics Number of Channels Typically 4 channels Connection Technology M12 Connectors Input Characteristics Input Voltage 24 V DC (Nominal) Input Type Sourcing (PNP) / High-side switching "1" Signal Level Typically 15...30 V DC "0" Signal Level Typically -3...5 V DC Input Current per Channel Typically 2...10 mA Diagnostic Functions (Key Feature) Diagnostic Capabilities • Wire-break/Open-circuit detection • Short-circuit detection • Overload detection • Overvoltage detection Diagnostic Indication Dual LED per channel (e.g., Green for status, Red/Yellow for fault) Diagnostic Data Available via the fieldbus/backplane to the PLC Electrical Isolation Channel-to-Channel Yes, typically isolated Channel-to-Bus Yes Performance Update Time < 1 ms per channel (typical) General Data Backplane Bus Proprietary (for XSystem platform) Supply Voltage (from backplane) 24 V DC Operating Temperature 0 °C to +55 °C Protection Rating (with connector) IP67 Standards IEC 61131-2, UL 508

More details >> Request a Quote >>
EATON
DE1-345D0FN-N20N
Category Parameter Specification / Typical Value General Characteristics Module Type Digital Mixed I/O (DI/DO) with Diagnostics I/O Configuration Typically 2 DI + 2 DO or similar combination Connection Technology M12 Connectors Input Characteristics (DI) Input Type Sourcing (PNP) / 24V DC Number of Inputs 2 "1" Signal Level 15...30 V DC Input Current Typically 2...10 mA Output Characteristics (DO) Output Type PNP (Sourcing) / 24V DC Number of Outputs 2 Output Current (Max. per channel) Typically 0.5A or 2A (Must verify with datasheet) Short-Circuit Protection Yes, electronic with diagnostics Diagnostic Functions (Key Feature) Diagnostic Capabilities • Wire-break detection • Short-circuit detection • Overload detection • Overvoltage detection (for both inputs and outputs) Diagnostic Indication Dual LED per channel (for both DI and DO) Diagnostic Data Available via the fieldbus/backplane to the PLC General Data Backplane Bus Proprietary (for XSystem platform) Supply Voltage (from backplane) 24 V DC Operating Temperature 0 °C to +55 °C Protection Rating (with connector) IP67 Standards IEC 61131-2, UL 508

More details >> Request a Quote >>
EATON
DS7-340SX070N0-L
Category Parameter Specification / Typical Value Electrical Ratings Rated Voltage 340 VAC (3~ + PE) Rated Current 70 A Frequency 50/60 Hz Test Standards Safety Standards UL 60939, IEC 60939, EN 60939 EMC Standards Designed to meet CISPR 11/32, EN 55011/55032 Filter Performance Insertion Loss > 60 dB (Typical at 1 MHz) > 45 dB (Typical at 100 kHz) Leakage Current Line to Ground Typically < 15 mA (per phase) General Data Number of Phases 3-Phase + Protective Earth (PE) Connection Type Heavy-Duty Screw Terminals Mounting Through-hole or bracket mounting (panel mount) Operating Temperature -25 °C to +100 °C Housing Material Metal case (typically aluminum) for effective shielding and heat dissipation

More details >> Request a Quote >>
EATON
DS7-34DSX070N0-D
Category Parameter Specification / Typical Value Electrical Ratings Rated Voltage 340 VAC (3~ + PE) Rated Current 70 A Frequency 50/60 Hz Test Standards Safety Standards UL 60939, IEC 60939, EN 60939 EMC Standards Designed to meet CISPR 11/32, EN 55011/55032 Filter Performance Insertion Loss > 60 dB (Typical at 1 MHz) > 45 dB (Typical at 100 kHz) Leakage Current Line to Ground Typically < 15 mA (per phase) General Data Number of Phases 3-Phase + Protective Earth (PE) Connection Type Heavy-Duty Screw Terminals Mounting Through-hole or bracket mounting (panel mount) Operating Temperature -25 °C to +100 °C Housing Material Metal case (typically aluminum) for effective shielding and heat dissipation

More details >> Request a Quote >>
EATON
DS7-340SX100N0-L
Category Parameter Specification / Typical Value Electrical Ratings Rated Voltage 340 VAC (3~ + PE) Rated Current 100 A Frequency 50/60 Hz Test Standards Safety Standards UL 60939, IEC 60939, EN 60939 EMC Standards Designed to meet CISPR 11/32, EN 55011/55032 Filter Performance Insertion Loss > 60 dB (Typical at 1 MHz) > 45 dB (Typical at 100 kHz) Leakage Current Line to Ground Typically < 20 mA (per phase) General Data Number of Phases 3-Phase + Protective Earth (PE) Connection Type Heavy-Duty Screw Terminals Mounting Through-hole or bracket mounting (panel mount) Operating Temperature -25 °C to +100 °C Housing Material Metal case (typically aluminum) for effective shielding and heat dissipation

More details >> Request a Quote >>
EATON
S801+T24N3S
Category Parameter Specification / Typical Value Contactor (S801) Rated Operational Current (Ie) 32 A at AC-3, 400V Utilisation Category AC-3: Squirrel cage motors (Starting, switching off) AC-1: Non-inductive loads Rated Thermal Current (Ith) 40 A Motor Rating at 400V AC 15 kW / 20 HP (Approx.) Coil Control Voltage Must be specified separately (e.g., 24V AC/DC, 110V AC, 230V AC, etc.) Mechanical Life > 10,000,000 cycles Electrical Life (AC-3) > 1,000,000 cycles Auxiliary Contact (T24N3S) Contact Configuration 3 NO (Three Normally Open Contacts) Rated Current Typically 6 A Utilisation Category AC-15: Control of electromagnetic loads (e.g., relays, contactor coils) General Data Number of Main Poles 3 Mounting 35 mm DIN Rail Connection Type Screw Terminals Standards IEC/EN 60947-4-1, UL 508

More details >> Request a Quote >>
EATON
DS7-342SX055N0-N
Category Parameter Specification / Typical Value Electrical Ratings Rated Voltage 342 VAC (3~ + PE) Rated Current 55 A Frequency 50/60 Hz Test Standards Safety Standards UL 60939, IEC 60939, EN 60939 EMC Standards Designed to meet CISPR 11/32, EN 55011/55032 Filter Performance Insertion Loss > 60 dB (Typical at 1 MHz) > 45 dB (Typical at 100 kHz) Leakage Current Line to Ground Typically < 10 mA (per phase) General Data Number of Phases 3-Phase + Protective Earth (PE) Connection Type Screw Terminals Mounting Through-hole or bracket mounting (panel mount) Operating Temperature -25 °C to +100 °C Housing Material Metal case (typically aluminum) for effective shielding and heat dissipation

More details >> Request a Quote >>
EATON
DS7-342SX081N0-N
Category Parameter Specification / Typical Value Electrical Ratings Rated Voltage 342 VAC (3~ + PE) Rated Current 81 A Frequency 50/60 Hz Test Standards Safety Standards UL 60939, IEC 60939, EN 60939 EMC Standards Designed to meet CISPR 11/32, EN 55011/55032 Filter Performance Insertion Loss > 60 dB (Typical at 1 MHz) > 45 dB (Typical at 100 kHz) Leakage Current Line to Ground Typically < 15 mA (per phase) General Data Number of Phases 3-Phase + Protective Earth (PE) Connection Type Screw Terminals Mounting Through-hole or bracket mounting (panel mount) Operating Temperature -25 °C to +100 °C Housing Material Metal case (typically aluminum) for effective shielding and heat dissipation

More details >> Request a Quote >>
EATON
DS7-340SX055NO-L
Category Parameter Specification / Typical Value Electrical Ratings Rated Voltage 340 VAC (3~ + PE) Rated Current 55 A Frequency 50/60 Hz Test Standards Safety Standards UL 60939, IEC 60939, EN 60939 EMC Standards Designed to meet CISPR 11/32, EN 55011/55032 Filter Performance Insertion Loss > 60 dB (Typical at 1 MHz) > 45 dB (Typical at 100 kHz) Leakage Current Line to Ground Typically < 10 mA (per phase) General Data Number of Phases 3-Phase + Protective Earth (PE) Connection Type Screw Terminals Mounting Through-hole or bracket mounting (panel mount) Operating Temperature -25 °C to +100 °C Housing Material Metal case (typically aluminum) for effective shielding and heat dissipation

More details >> Request a Quote >>
1 2
···
128 129 130 131 132 133 134
···
177 178
Related products
Honeywell 51304585-100: Advanced Control Module for Industrial Automation -

The Honeywell 51304585-100 Industrial Control Module is designed to offer precise control and monitoring capabilities in demanding industrial environments, ensuring reliability and efficiency in various applications.
ACS800-450kw
Key Features & Specifications:
Power & Performance

Rated Power: 450 kW (603 HP)

Output Current: Depends on voltage (e.g., ~780A at 400V, ~390A at 690V)

Input Voltage: 380–690V AC, 3-phase, 50/60Hz

Output Frequency: 0–300 Hz (configurable)

Advanced Motor Control

Direct Torque Control (DTC): Ensures fast torque response (±0.1% speed accuracy) without needing an encoder (sensorless control).

Supports induction motors (IM) and synchronous motors (SM).

Energy Efficiency & Savings

Regenerative braking capability (with optional brake chopper/unit).

Optimized for IE3/IE4 high-efficiency motors, reducing energy consumption.

Robust Design & Cooling

Air-cooled (IC 411) or liquid-cooled (LC) options available.

Enclosure: IP21 (standard) or IP54 (optional) for dust/moisture protection.

Smart Connectivity & Control

Fieldbus Protocols: PROFIBUS, Modbus, CANopen, Ethernet/IP (via optional adapters).

ABB Drive Composer: PC tool for parameterization, monitoring, and diagnostics.

PLC Embedded Control (optional, reducing external hardware needs).

Protection & Safety

Built-in safeguards: Overcurrent, overvoltage, motor overload, short-circuit, and ground fault protection.

Complies with CE, UL, cUL, and IEC standards.
CSNG251
Product Description: The Honeywell CSNG251 series represents a high-performance pressure transmitter designed for demanding industrial applications. Utilizing advanced silicon piezoresistive sensing technology, this transducer delivers exceptional measurement accuracy and long-term reliability. Key Features: Military-grade durability with stainless steel construction Temperature compensated for stable performance across wide operating ranges OEM configurable with multiple electrical and mechanical options EMI/RFI protected for industrial environments Overpressure protection up to 2x full scale Typical Applications: Hydraulic system monitoring Compressed air systems Process control instrumentation Test and measurement equipment Mobile hydraulic applications