The ABB AF09‑30‑10‑11 is a compact 3‑pole AC contactor designed for industrial and commercial control applications. It is used to switch and control three‑phase power circuits, including motors and other inductive or non‑inductive loads. The contactor features an electronic coil interface that accepts a wide range of AC or DC control voltages, and includes one built‑in normally open auxiliary contact for control or signaling purposes. Its block‑type design and DIN‑rail compatibility make it suitable for automation panels, motor starters, HVAC systems, and general power switching tasks.

The ABB Sentry SSR10 24VDC is a safety relay designed for use in machine and industrial safety circuits. It monitors safety devices such as emergency stop buttons, safety gate switches, and safety sensors with contact or OSSD outputs, and provides safe output switching to control downstream devices. The unit has a 24 VDC control supply and allows selection between manual or automatic reset using a front‑mounted switch. It is typically mounted on a DIN rail and used where reliable safety monitoring is required in automation and machine systems up to high safety levels.

The ABB XT3N250 TMD200/2000 FF 3P is a three‑pole molded case circuit breaker (MCCB) from ABB’s Tmax XT series, designed for industrial and commercial power distribution protection. It uses a thermal‑magnetic (TMD) trip unit to provide combined overload and short‑circuit protection. The breaker is intended for fixed mounting with front terminals and is suitable for protecting three‑phase AC or DC electrical systems. The adjustable overload range and fixed instantaneous short‑circuit setting allow coordinated protection in electrical distribution and motor feeder applications.

The ABB XT1N160 TMD160‑1600 FF 3P is a three‑pole molded case circuit breaker (MCCB) from ABB’s Tmax XT series designed for industrial and commercial electrical protection. It combines thermal‑magnetic protection to defend electrical circuits against overloads and short‑circuits, with a fixed mounting and front‑connected terminals for installation in distribution boards, motor feeders, or panelboards. This breaker is suitable for protection of three‑phase power systems up to 690 V AC or 500 V DC and offers adjustable trip thresholds for coordinated protection schemes.

The ABB AF185‑30‑11 is a three‑pole industrial AC contactor designed to switch and control three‑phase power circuits in industrial and commercial electrical systems. It is suitable for motor starting, isolation, bypass circuits, and distribution switching of heavy loads. This contactor features a wide control (coil) voltage range that supports both AC and DC supply, making it flexible for use in varied control systems. It includes three normally open (NO) main contacts and built‑in auxiliary contacts for control and feedback functions. The rugged, block‑type design ensures reliable performance in demanding environments.

The ABB AX50‑30‑11‑80 is a three‑pole AC magnetic contactor designed for industrial and commercial electrical control systems. It is used mainly for switching and controlling three‑phase power circuits and motors up to 690 V AC. This contactor has a block‑type design with three main normally open contacts and includes one normally open (NO) and one normally closed (NC) auxiliary contact for control and signaling functions. It is suitable for use with AC control/coils at 220–230 V 50 Hz or 230–240 V 60 Hz, and it provides robust mechanical and electrical performance for general motor and power switching applications

The ABB AF16Z‑30‑10‑23 is a three‑pole AC contactor designed for controlling and switching power circuits in industrial and commercial electrical systems. It is suitable for starting and stopping three‑phase motors, and switching non‑inductive or slightly inductive loads in circuits up to 690 V AC. The contactor features an electronic coil interface that accepts a wide range of control voltages (AC or DC), and includes a built‑in surge suppression capability. It has one integrated normally open auxiliary contact for control and signaling.

The ABB T5N630 TMA500/2500‑5000 FF 3P is a three‑pole molded case circuit breaker (MCCB) from the ABB SACE Tmax T5N series, designed for industrial and commercial power distribution protection. It provides fixed mounting three‑pole protection of electrical circuits and equipment against overload and short‑circuit conditions, with a thermal‑magnetic trip unit (TMA) that allows adjustable short‑circuit release settings. This MCCB is suitable for use in switchboards, motor feeders, and distribution panels where robust circuit protection and high interrupting capacity are required.

The ABB AX40‑30‑10‑80 is a 3‑pole AC magnetic contactor designed for control and switching of three‑phase power circuits in industrial and commercial applications. It is suitable for controlling three‑phase motors, lighting, heating, and other loads up to 690 V AC. The contactor features a block‑type design with three normally open main contacts and one built‑in auxiliary normally open contact, intended for AC control voltages of 220–230 V 50 Hz or 230–240 V 60 Hz. It is widely used in motor control starters, relay panels, and general power switching tasks.

The ABB A16‑30‑10 contactor (Part Number 1SBL181001R8010) is a compact three‑pole AC magnetic contactor designed for general control and switching of three‑phase electrical power circuits. It is commonly used for controlling three‑phase motors, lighting, heating, capacitor banks, and other industrial loads up to 690 V AC. This contactor includes three normally open main contacts and one normally open auxiliary contact for control and signaling functions. The device features a robust block‑type electromagnetic design, suitable for installation in industrial control panels, machinery, and motor starter assemblies.