Key Technical Parameters General & Electrical Ratings Product / Model: ABB A16‑30‑10 Contactor Part Number: 1SBL181001R8010 Main Poles: 3 normally open (3 NO) Auxiliary Contact: 1 normally open (1 NO) Control/Coil Voltage (Rated): 220 – 230 V AC at 50 Hz 230 – 240 V AC at 60 Hz Rated Operational Voltage (Main Circuit): Up to 690 V AC Rated Operational Current (AC‑3): ~17 A at ~220–240 V AC ~17 A at ~380–400 V AC ~16 A at ~440 V AC Lower currents at higher voltages (500–690 V) Performance & Power Rated Operational Power (AC‑3): ~4 kW at ~220–240 V AC ~7.5–9 kW at ~380–440 V AC ~9 kW up to 690 V AC Rated Operational Current (AC‑1): ~30 A at 690 V AC (at 40 °C) Rated Operational Current (AC‑15): Suitable for control and signaling loads (e.g., ~4 A at 220–240 V AC) Rated Operational Current (DC‑13): Suitable for DC control applications (various values depending on voltage) Rated Breaking & Making Capacity: Making: ~10 × Ie (AC‑3) Breaking: ~8 × Ie (AC‑3) Mechanical & Connection Mounting: DIN‑rail or screw mounting Connection Terminals: Screw terminals for both main and auxiliary circuits Dimensions: Approx. 44 mm (width) × 74 mm (height) × 74 mm (depth) Weight: Approx. 0.34 kg Switching Frequency: AC‑1: ~600 cycles/hour AC‑3: ~1200 cycles/hour Mechanical Switching Frequency: ~3600 cycles/hour Coil & Operating Coil Power Consumption: Holding: ~8 V·A Pull‑in: ~70–74 V·A Operate / Release Times: Operate: ~10–26 ms Release: ~4–11 ms Standards & Ratings Standards Compliance: IEC 60947‑1 and IEC 60947‑4‑1 (general industrial contactor standards) Insulation Voltage: ~1000 V (IEC rating) Impulse Withstand Voltage: ~8 kV Environmental: Ambient operation typically from ~‑40 °C to ~+55 … +70 °C depending on conditions Degree of Protection: IP20 on main, auxiliary, and coil terminals Typical Applications Motor control starters and reversing arrangements Switching of lighting, heating, and small industrial loads General power circuit control in machine panels Interlocking and auxiliary switching functions