The ABB OVR T2 3N 80‑275S P TS QS is a Type 2 surge protective device (SPD) designed to protect low‑voltage electrical systems from transient overvoltages caused by lightning strikes and switching surges. It is intended for installation near the service entrance or load distribution point on a DIN‑rail and is compatible with three‑phase TN‑S and TT power distribution systems. The device features multiple protection stages to divert surge energy safely to ground, limiting the voltage seen by downstream equipment. It incorporates visual and auxiliary signalling for operational and maintenance feedback and is suitable for residential, commercial, and industrial distribution panels where enhanced surge protection is required.

The ABB AS09‑30‑10‑25 AC220V is a three‑pole AC contactor designed for reliable switching and control of three‑phase power circuits. It is commonly used to control motors and other loads in industrial, commercial, and automation applications with supply voltages up to 690 V AC or 220 V DC. The contactor features a block‑type design with three main power contacts and at least one built‑in auxiliary contact for control feedback. It is coil‑operated with a 220 V AC control voltage and offers a compact modular form factor that can be mounted in panels or control cabinets. The unit is suitable for switching non‑inductive or slightly inductive loads and can be paired with a range of accessories for expanded functionality.

The ABB S202‑K4 is a 2‑pole miniature circuit breaker from ABB’s System pro M compact S200 series designed to provide reliable overload and short‑circuit protection in low‑voltage electrical circuits. It uses a thermal‑magnetic trip unit with a K‑type characteristic, which provides enhanced tolerance for inrush currents and quick response to fault conditions. The compact DIN‑rail mountable device is suitable for residential, commercial, and industrial electrical panels, offering robust protection and visual ON/OFF status indication

The ABB TINA 8A is a safety connection block designed to provide a centralized interface for up to eight safety devices in a dynamic safety communication loop (such as ABB Vital or Pluto safety systems). It serves as a connection node that allows multiple DYNlink‑compatible safety sensors (e.g., emergency stops, safety switches, light curtains) to be connected via M12 connectors. Each sensor’s signal can be wired independently to the block, simplifying cabling and improving installation flexibility in safety‑critical automation systems. The unit features a rugged enclosure with high protection rating suitable for harsh industrial environments and supports widely used safety controller platforms.

The ABB MS2X‑2.5 is a compact manual motor starter and motor protection circuit breaker designed to provide reliable overload, short‑circuit, and phase‑failure protection for small motors and motor circuits. It features an adjustable current range of 1.6 – 2.5 A, allowing it to be set to the appropriate motor load requirements. The device combines manual ON/OFF switching with protective functions in a single modular unit that can be mounted on DIN rails in motor control panels. It is commonly used in industrial and commercial applications where simple, fuseless motor protection and control is needed.

The ABB MJS5‑40B is a modular 4‑position joystick control switch designed for industrial control panels and operator stations. It belongs to ABB’s modular pilot device range and is intended for mounting in standard 22 mm panel cutouts. The joystick provides maintained (latching) operation in four directions (up, down, left, right) without automatically returning to center, offering reliable manual control of machinery and processes. The unit is supplied as the actuator mechanism only and is to be complemented with appropriate contact blocks to create a complete switch assembly. It features a rugged plastic housing with high protection ratings for use in harsh industrial environments.

The ABB CT‑MFC.12 is a compact multifunction electronic time relay designed for DIN‑rail industrial control and automation systems. It offers a wide range of timing functions and adjustable time ranges, making it suitable for diverse applications such as motor control, lighting control, HVAC systems, and general automation timing sequences. The relay accepts a broad supply voltage range for flexible installation in AC or DC control circuits and provides a single changeover (SPDT) output contact with reliable switching capability. Its slim, space‑saving form factor and standard screw‑terminal connections make it easy to install in control panels.

The ABB S202‑K0.5 is a compact 2‑pole miniature circuit breaker from ABB’s System pro M / S200 series designed for DIN‑rail electrical distribution and protection. It offers overload and short‑circuit protection via a thermal‑magnetic trip unit with a K‑type characteristic, suitable for applications requiring higher in‑rush current tolerance. The breaker is intended for use in residential, commercial, and industrial panels and protects circuits rated at 0.5 A with reliable interruption performance up to standard short‑circuit capacities. It features space‑efficient modular design and finger‑safe terminals for safer installation and maintenance.

The ABB DDA202 AC‑63/0.03 Residual Current Device (RCD) is a modular residual current protective block designed for assembly with compatible miniature circuit breakers (MCBs) on DIN rails. It provides reliable protection against the effects of sinusoidal alternating earth fault currents, offering enhanced safety by detecting and interrupting leakage currents to earth. With a rated current of 63 A and a residual tripping sensitivity of 30 mA, this device helps prevent electric shock risks and protects people and equipment in residential, commercial, and industrial electrical installations. It meets applicable international safety standards and is suitable for use in 230/400 V AC power systems with 50 / 60 Hz frequency.

The ABB MEP6‑0 is a modular empty plastic pushbutton enclosure designed for use with 22 mm pilot devices and modular control units. It supports up to six operator elements, providing flexible configuration options for industrial control panels. Made from robust polycarbonate polypropylene, the enclosure is suitable for indoor and outdoor environments and offers strong environmental protection according to NEMA and IP standards. Typical applications include control stations, pendant stations, and machine interface panels in industrial automation and manufacturing settings.