Products
Products
home
OVR T2 3N 80-275S PTS QS

The ABB OVR T2 3N 80‑275S P TS QS is a Type 2 surge protective device (SPD) designed to protect low‑voltage electrical systems from transient overvoltages caused by lightning strikes and switching surges. It is intended for installation near the service entrance or load distribution point on a DIN‑rail and is compatible with three‑phase TN‑S and TT power distribution systems. The device features multiple protection stages to divert surge energy safely to ground, limiting the voltage seen by downstream equipment. It incorporates visual and auxiliary signalling for operational and maintenance feedback and is suitable for residential, commercial, and industrial distribution panels where enhanced surge protection is required.

open
TEL:+86 13600179521
Mail:info@hongkongeasy.com
info@hongkongeasy.com
WhatsApp
Parameters
Request a Quote
Return to List
Technical Specifications Specification Value Manufacturer ABB Model / Part Number OVR T2 3N 80‑275S P TS QS (also 2CTB815708R0800) Product Type Surge Protective Device (SPD), Type 2 Protection Purpose Protection against transient overvoltages, lightning and switching surges Number of Poles Protected 4 (3 phases + Neutral) Rated Voltage (Uᵣ) 230 V AC Nominal System Voltage (Uₒ) 230 / 400 V AC Maximum Continuous Operating Voltage (U₍c₎) 275 V AC Voltage Protection Level (Uₚ) ~1.4 kV (L‑N, N‑PE) Surge Current Rating (8/20 µs) Max. 80 kA total Nominal Discharge Current (8/20 µs) 20 kA Impulse Current (10/350 µs) ~6.25 kA Rated Service Short‑Circuit Capacity (Iₛₙ) Up to 100 kA Protection Class Class II Standards Compliance IEC 61643‑11 / EN 61643‑11 Mounting DIN‑rail (35 mm) Protection Degree IP20 Operating Temperature Range −40 °C to +80 °C Auxiliary Contacts 1 NO + 1 NC (for remote signalling) Status Indicators Visual indicators for each protection module Auxiliary Circuit Load Min. 12 V DC @10 mA, Max. 250 V AC @1 A Typical Use Surge protection for three‑phase electrical distribution systems