The ABB GSH202 AC‑D25/0.03 is a two‑pole residual current operated circuit breaker (RCCB/RCD) designed for electrical safety in low‑voltage AC distribution systems. It provides protection against earth leakage faults by rapidly disconnecting circuits when an imbalance between live and neutral currents exceeds 30 mA, helping to prevent electric shock and reduce fire risk. The AC‑D characteristic indicates that the device is sensitive to both standard AC residual currents and high‑frequency components typical of certain load types. This compact DIN‑rail mountable unit is suitable for residential, commercial, and light industrial installations requiring enhanced earth‑fault protection.

ABB 1SBL417001R7211 Contactor (AF75‑30‑11, 20–60 V DC Coil) This product is a three‑pole industrial contactor from ABB’s AF Series designed for controlling electrical power circuits, especially in motor control and general power switching applications. It features four normally‑open (4 NO) main contacts, a wide‑range DC coil (20 – 60 V DC), and robust construction for reliable operation in low‑voltage AC and DC systems up to 690 V. The contactor accepts a broad control voltage range and is suitable for applications such as three‑phase motor control, lighting circuits, bypass switching, capacitor banks, and DC power circuits. IP40 protection and a wide ambient temperature range enhance durability in industrial environments

The ABB 1SDA000174R1 is a three‑pole fixed‑type molded case circuit breaker from the ABB SACE S1 / S1N series. It is designed for protection of electrical power distribution circuits against overloads and short‑circuit faults. This circuit breaker is suitable for industrial and commercial applications where reliable protection and switching of three‑phase circuits are required. It provides thermal‑magnetic trip protection and robust performance for low‑voltage power systems.

The ABB DS201 C16 A30 RCBO (Residual Current Circuit Breaker with Overcurrent Protection) is a compact protective device designed for single‑phase electrical circuits. It combines the functions of an overcurrent circuit breaker and a residual current device (earth leakage protection) in a single unit with a 1P+N (one pole + neutral) configuration. This RCBO provides comprehensive protection against overloads, short‑circuits, ground faults, and indirect contacts, with additional protection against direct contact through a 30 mA sensitivity. It is suitable for use in residential, commercial, and light industrial electrical distribution panels.

ABB AF265‑30‑11‑13 AC/DC Contactor (Wide Coil Voltage 100–250 V) The ABB AF265‑30‑11‑13 is a three‑phase industrial contactor designed for switching and controlling electrical power circuits. It features a wide range control coil that operates on both AC and DC voltages from 100 V to 250 V, making it suitable for global applications without coil variations. This contactor delivers robust performance for motor control and power distribution in demanding industrial environments

ABB S2C‑H6R Auxiliary Contact (Product ID: 2CDS200912R0001) – Auxiliary contact block for indication of the main device’s contact position. Designed to provide ON/OFF status signaling for circuit protection devices such as miniature circuit breakers (MCBs), residual‑current circuit breakers (RCCBs) and residual current operated circuit breakers with overcurrent protection (RCBOs)

ABB T2S 160 TMD100‑1000 MCCB – Moulded Case Circuit Breaker Automatic Circuit Breaker, fixed three‑pole (3P) version with front terminals, thermal‑magnetic trip unit type TMD (adjustable thermal, fixed magnetic), rated 100 A, designed for low‑voltage power distribution and protection applications.

The ABB XT3N 250 TMD 250‑2500 3P FF is a three‑pole molded case circuit breaker designed for low‑voltage power distribution and reliable protection against overloads and short circuits in industrial and commercial electrical installations. It is equipped with a TMD thermal‑magnetic release unit that allows adjustable instantaneous trip settings from 250 A up to 2500 A, offering flexible coordination and protection. The breaker has fixed front terminals (FF) for straightforward installation in switchboards, motor control centers, and panels.

The ABB A12‑30‑10 is a three‑pole electromechanical AC contactor from ABB’s A‑line series, designed for switching and controlling three‑phase motors and general power circuits. It features a compact design with screw terminals and is suitable for use with thermal overload relays and auxiliary contact blocks to form complete motor starter assemblies. This model is configured with a 110 V AC (50 Hz) / 110–120 V AC (60 Hz) coil for industrial control and automation applications

The ABB 1SDA092547R1 is a four‑pole (4P) molded case circuit breaker (MCCB) from ABB’s low‑voltage protection range. It combines adjustable thermal‑magnetic trip protection with fixed and cable‑ready terminal options, providing reliable overload and short‑circuit protection for three‑phase electrical distribution networks. This breaker is suitable for industrial and commercial electrical systems where coordinated circuit protection and robust performance are required. The product may also be supplied with additional modules (such as a residual current or auxiliary interface) depending on variant.