The ABB A12‑30‑01 220 V Contactor is a three‑pole AC power contactor designed for industrial and commercial control of three‑phase power circuits, including motor switching, lighting, and general load control. It features three main normally‑open (NO) contacts and one auxiliary contact, making it suitable for control feedback or interlock functions. The contactor uses an AC control coil rated for 220 – 230 V (50 Hz) or 230 – 240 V (60 Hz) for reliable operation and is built to meet international IEC standards for industrial contactor performance. It is compatible with DIN‑rail or panel mounting with screw‑type terminals for robust and secure connections.

The ABB 1SDA038676R1 is a three‑pole molded case circuit breaker (MCCB) from ABB’s SACE Isomax S5 series, configured with a PR212‑P electronic trip unit with LSI (Long‑Time, Short‑Time, and Instantaneous) protection and a 630 A rated current. This breaker provides selectable protection against overloads, short circuits, and instantaneous faults in three‑phase low‑voltage power distribution systems. The device features a fixed mounting with front connections and is designed for reliable circuit protection and coordination in industrial and commercial electrical installations.

The ABB AX09‑30‑01‑81 is a three‑pole AC contactor from ABB’s AX series designed for control and switching of three‑phase power circuits. It is suitable for industrial and commercial applications where reliable and compact switching of motors and general loads is required. The contactor is operated by a 24 V AC control coil (50/60 Hz) and features three main normally open (NO) contacts along with one built‑in auxiliary normally closed (NC) contact for control feedback or interlock applications. Its block‑type design provides robust performance up to 690 V AC and is compatible with DIN‑rail or panel installations.

The ABB 1SDA092548R1 is a 4‑pole molded case circuit breaker (MCCB) designed for reliable overcurrent protection in electrical distribution systems. It combines a thermomagnetic trip mechanism with a plastic enclosure, offering compact yet robust protection against overloads and short‑circuits. This breaker is suitable for use in commercial, industrial, and panel applications requiring dependable four‑pole protection and safety. Model designation S2N160 R160 4P FFC+RC212V indicates a 160 A rated breaker with specific release and accessory configurations for enhanced reliability and performance.

The ABB 2CDS251001R0634 is a single‑pole, type C miniature circuit breaker from ABB’s System pro M compact S200 series. This compact overcurrent protection device is designed for the protection of electrical circuits against overloads and short‑circuits in residential, commercial, and light industrial installations. It features a thermal‑magnetic tripping mechanism that reacts to sustained overloads and instantaneous short‑circuit currents, offering reliable performance and safety in low‑voltage AC and DC applications. The breaker can also accommodate auxiliary accessories such as signalling contacts for enhanced monitoring.

The ABB AL26‑30‑10 24 V DC Contactor is a compact three‑pole power contactor designed for control and switching of three‑phase electrical power circuits. It features three main normally open (NO) contacts and one normally open auxiliary contact for control feedback. The contactor uses a 24 V DC coil with low consumption, making it suitable for direct control by PLC outputs or DC control systems. It is engineered for robust operation in industrial environments and is ideal for motor control, power switching, lighting, and general load control up to 690 V AC. The device complies with IEC standards for contactors and supports high switching frequencies with reliable mechanical performance.

ABB 1SBL323001R8810 (AL40‑30‑10 220 V DC Contactor) The ABB 1SBL323001R8810 is a three‑pole DC‑operated contactor from the AL series, designed for industrial motor and power circuit control. It features three main normally‑open contacts (3 NO) and one auxiliary normally‑open contact (1 NO), with a 220 V DC coil for reliable switching in DC control applications. The low‑power DC coil enables direct driving from PLC outputs, and the contactor is suitable for use in three‑phase power circuits up to 690 V AC. Its block contactor design provides robust switching performance in motor control, lighting, and general industrial power applications.

The ABB MS325‑16 Manual Motor Starter is a three‑pole motor protection device that combines manual ON/OFF switching with overload and short‑circuit protection for electric motors. It is designed to protect motors without the need for external fuses, saving space and cost while ensuring rapid disconnection when abnormal conditions occur. This compact and robust starter includes a rotary handle for clear switch position indication and is suitable for use in both single‑phase and three‑phase applications in industrial and commercial environments. The device also offers built‑in disconnect capability and adjustable current settings to match motor full‑load current requirements.

The ABB XT1N160 TMD80‑800 FF 3P is a three‑pole fixed molded case circuit breaker (MCCB) from ABB’s Tmax XT series, designed for industrial and commercial low‑voltage power distribution protection. It features a thermo‑magnetic (TMD) trip unit with an adjustable short‑circuit setting range of 80–800 A, offering reliable overload and short‑circuit protection for three‑phase electrical circuits. The breaker is constructed for fixed installation with front connections and provides robust switching performance up to 690 V AC and resistant performance in AC/DC systems

The ABB AL30‑30‑10 24 V DC Contactor is a three‑pole power contactor designed for control and switching of three‑phase electrical power circuits. It features a DC coil rated at 24 V DC and incorporates a single normally open (1 NO) auxiliary contact. This block‑type contactor is suitable for industrial applications including motor control, power circuit switching, isolation switching, lighting, and capacitor bank control. The unit is designed with screw terminals, compact dimensions, and is compatible with low‑voltage AC systems up to 690 V. It is suitable for direct control by PLC outputs owing to its low‑consumption DC coil configuration.