SIEMENS - Products - Easy Semiconductor Technology (Hong Kong) Limited 易擇半導體科技(香港)有限公司

SIEMENS

3RT2026-2BB40

The 3RT2026-2BB40 is a 3-pole AC contactor from Siemens' 3RT2 series, rated at 40 A (Ith) for 690 V AC (deratable to 1000 V AC) main contacts. Its 24 V DC coil consumes 10 W (standby) / 20 VA (in-run), featuring 3 NO main contacts and 1 NO + 1 NC built-in auxiliary contacts.

More details >> Request a Quote >>

SIEMENS

3NA3824

The 3NA3824 is a 3-pole molded case circuit breaker from Siemens' 3NA3 series, rated at 250 A for 690 V AC (deratable to 1000 V AC) and 250 V DC. It features a 50 kA breaking capacity at 400 V AC, with thermal-magnetic trip units for adjustable overcurrent protection (Ir/Is settings).

More details >> Request a Quote >>

SIEMENS

6EP13321SH22

The 6EP1332-1SH22 is a 24 V DC/10 A (240 W) switch mode power supply from Siemens' SITOP PSU8600 series, designed for industrial applications. It accepts a wide-range input of 100–240 V AC (85–264 V AC) at 50/60 Hz, delivering a stable 24 V DC output with ±1% tolerance at full load. The power supply offers up to 94% efficiency and includes a dynamic boost function for 12 A output over 5 seconds to support startup loads.

More details >> Request a Quote >>

SIEMENS

3SU1400-1AA10-1FA0

The 3SU1400-1AA10-1FA0 is an illuminated pushbutton from Siemens' 3SU1 series, featuring a 30 mm mushroom head actuator with a spring-return mechanism. It integrates 1 NO (normally open) and 1 NC (normally closed) contact, rated for 10 A/250 V AC or 5 A/30 V DC, and includes a green LED indicator powered by 24 V DC.

More details >> Request a Quote >>

SIEMENS

3SE5112-0CH80

The 3SE5112-0CH80 is an emergency stop pushbutton from Siemens' 3SE5 series, featuring a 60 mm mushroom head actuator with a push-to-activate, twist-to-release mechanism. It integrates 2 NO (normally open) and 2 NC (normally closed) contacts, rated for 10 A/250 V AC or 5 A/30 V DC, with a mechanical life exceeding 1 million operations.

More details >> Request a Quote >>

SIEMENS

3SE2924-3AA20

The 3SE2924-3AA20 is a mechanical limit switch from Siemens' 3SE2 series, featuring a roller plunger actuator with a 30 mm horizontal roller. It provides 1 NO (normally open) and 1 NC (normally closed) contact, rated for 10 A/250 V AC or 5 A/30 V DC, with a mechanical life of ≥1 million operations.

More details >> Request a Quote >>

SIEMENS

3RW3027-1BB04

The 3RW3027-1BB04 is a 3-phase AC soft starter from Siemens, designed for motors up to 15 kW at 400 V AC or 18.5 kW at 500 V AC. It supports voltage ranges of 380–480 V (for 15 kW) and 500–690 V (for 18.5 kW), with current ratings of 32 A (400 V) and 25 A (690 V).

More details >> Request a Quote >>

SIEMENS

6ES72213BD300XB0

6ES72213BD300XB0 Brief English Description
The 6ES72213BD300XB0 is a 16-channel digital input module for Siemens SIMATIC S7-1200, designed for DC 24 V industrial applications. It supports sink/source input configurations with a voltage range of 11–30 V DC and 4 mA rated current at 24 V. Each channel features programmable filter times (0.2–12.8 ms) to reduce noise interference.

More details >> Request a Quote >>

SIEMENS

6ES7972-0BA12-0XA0

The 6ES7972-0BA12-0XA0 is a PROFIBUS DP Fast Connect Sub-D plug (9-pin male) for Siemens S7-300/400 systems. It supports PROFIBUS DP/V0 communication at 9.6 kbps to 12 Mbps, featuring screwless Fast Connect termination for shielded 2-wire cables. An integrated switch enables network termination with 110–120 Ω resistance for end nodes.

More details >> Request a Quote >>

SIEMENS

6ES7151-1AA06-0AB0

6ES7151-1AA06-0AB0 Brief English Description
The 6ES7151-1AA06-0AB0 is a PROFINET Interface Module for Siemens' ET 200SP distributed I/O system, designed to connect field devices to a PROFINET network. It supports PROFINET RT/IRT communication with two RJ45 ports (10/100 Mbps, switch function) and enables media redundancy via MRP.

More details >> Request a Quote >>