ABB GCE7007102R0102 is an Electronic Interface and Power Supply Module for ABB's S800 I/O system, specifically designed as a remote I/O station interface.It serves as the "head module" or "communication module" for a standalone S800 Remote I/O Station. It connects the station to a higher-level controller (like an AC800M, AC500, or third-party PLC) via a fieldbus communication module (e.g., a CI873 PROFIBUS module) and provides regulated power and the internal bus for all I/O modules mounted in the same station.

The ABB AF09‑40‑00‑13 is an IEC‑rated AC contactor from ABB’s AF09 series, designed for motor control and power switching in industrial and commercial applications. It is a non‑reversing four‑pole contactor with a rugged design suitable for controlling three‑phase motors, resistive loads, and general switching tasks.

The ABB CP1‑10B‑10 is a compact, non‑illuminated panel‑mount pushbutton switch designed for industrial and commercial control panels. It is part of ABB’s CP Series of compact pushbutton devices and is typically used for control actions such as start/stop, reset, acknowledge, or other momentary operator inputs.

The ABB 83330‑500 switch actuator is an accessory device in the ABB‑Welcome residential or commercial door communication/intercom ecosystem. When integrated with outdoor calling stations and indoor monitors,

The ABB TVOC‑2‑H1 is an additional Human‑Machine Interface (HMI) for the ABB TVOC‑2 Arc Guard System. It’s designed to extend the monitoring capabilities of the arc detection system, providing visual status and alarms for arc fault conditions detected by the TVOC‑2 main unit.

The ABB OFD500EA is an electronic fuse status monitor (DC fuse monitor) designed as an accessory for electrical protection and distribution equipment. It monitors the condition of cylindrical fuses used in low‑voltage switchgear or switch‑fuse combinations and provides a change‑of‑state output when a fuse element opens (blows), enabling remote indication or protective control.

The ABB CDXN080001P0026 is a PROFIBUS DP-V1 master communication interface module for the AC500 PLC (Programmable Logic Controller) family, specifically designed for the PM5xx series of central processing units (CPUs). It enables the AC500 PLC to act as the controlling master on a PROFIBUS DP industrial network, allowing it to communicate with and manage a wide array of slave devices such as remote I/O stations, variable speed drives, motor starters, and measurement transducers.

The ABB EKIP COM GPRS‑M module is a quad‑band GSM/GPRS wireless communication adapter that allows compatible ABB low‑voltage devices to send and receive data over a mobile data network. It supports connection to ABB breakers and monitoring systems and enables features such as remote parameter access, alarm/event notifications, and integration with supervisory systems over TCP/IP or SMS. The unit is typically DIN‑rail mounted and operates with a 24 V DC auxiliary supply.

The ABB 1SDA058273R1 is a mechanical key lock accessory designed for use with ABB Emax series low‑voltage power circuit breakers. It allows a circuit breaker to be securely locked in the open (OFF) position using a specific key (Key No. 20007), providing a physical safety interlock. This accessory is typically installed on the breaker’s operating handle or mechanism to prevent accidental or unauthorized switching. It is suitable for industrial electrical distribution panels where safe isolation is required.

The ABB EMPLUS‑PRO is a power and energy monitoring instrument used to measure and display key electrical parameters in three‑phase or single phase power systems. It typically installs on DIN‑rail or panel cut‑outs and provides real‑time measurement of voltage, current, active/reactive power, energy (kWh), frequency, power factor, and sometimes harmonics or demand values.