The ABB MP3-11W is a 3-phase, 4-wire (3P4W) intelligent measurement and protection unit designed for the main incoming line of low-voltage distribution switchboards. It provides comprehensive energy monitoring, power quality analysis, and basic protection functions for system operators. The “W” suffix indicates it has a built-in, high-precision (0.5S class) energy metering core, allowing it to function as a statutory billing-grade meter in many applications. Its core purpose is to deliver accurate data for energy management, load analysis, and cost allocation within commercial, industrial, and infrastructure facilities.

The ABB C3SS2-10B-20 is a 2-pole (1+N) miniature circuit breaker with a Type B tripping characteristic and a 10 kA breaking capacity. It has a 20A rated current and is designed to protect electrical circuits against overloads and short circuits in residential, commercial, and light-industrial applications. The "1+N" configuration means the first pole ("1") provides full protection (overload and short-circuit), while the neutral pole ("N") functions primarily as an isolator or switching pole; it may provide short-circuit protection but typically does not have overload protection. It is designed for easy installation on a standard 35mm top-hat DIN rail.

TheABBMCB-01 is a Multifunction Circuit Breaker Communication Interface Module. It serves as a critical gateway for communication and control between ABB's Emax 2 series low-voltage air circuit breakers (ACBs) and higher-level supervisory systems.

The ABB CL2‑513Y is a compact illuminated pilot light designed for industrial control and signaling applications. It features a yellow light indicator with an integrated LED that visually shows machine status or control panel conditions. The unit is part of ABB’s CL2 compact range, offering reliable performance with high ingress protection for harsh environments. It mounts into standard 22 mm panel holes, making it suitable for electrical enclosures, automation panels, and equipment signaling.

The ABB M2SS4‑11L is a modular illuminated selector switch designed for industrial control panels and automation systems. It features a 2‑position maintained long handle with a blue illuminated actuator that provides clear operator feedback. The switch is part of ABB’s modular plastic pilot device range, allowing flexible assembly with contact blocks and LED modules depending on the control circuit design. This selector switch is robust enough for harsh industrial environments and easy to install, offering reliable manual selection between two circuit states.

The ABB NF44E‑13 is an 8‑pole contactor relay used for switching auxiliary and control circuits in industrial electrical systems. It is designed to operate with either AC or DC control voltage and has a wide coil voltage range of 100 – 250 V AC/DC, making it versatile for global applications. The relay features mechanically‑linked auxiliary contacts that deliver reliable switching performance. It includes built‑in surge protection, eliminating the need for additional surge suppressors, and is suitable for DIN‑rail or panel mounting with screw terminals.

The ABB MA1‑8149 is a mounting tool designed for power tool installation of 22 mm panel‑mount components from ABB’s pilot device series. It is used to quickly and securely install pushbuttons, selector switches, pilot lights, and other compatible control devices into panels when using a compatible power tool, helping improve assembly efficiency in industrial control panels and electrical enclosures. It is an accessory tool intended to support proper installation of ABB pilot devices.

The ABB E211‑16‑10 is a compact on‑off (isolator) switch designed for DIN‑rail mounting in electrical control panels and distribution boards. It provides simple manual power or signal switching with a reliable single‑pole, normally‑open contact, making it suitable for ON/OFF functions in lighting, machinery control, signalling circuits, and industrial automation applications. The modular width of just 0.5 units (≈9 mm) allows space‑efficient installation in control cabinets.

The ABB EKIP SUPPLY 110‑240VAC/DC E1.2..E6.2‑XT is a power supply accessory module designed for use with ABB low‑voltage circuit breakers in the SACE Emax 2 and SACE Tmax XT series. It provides a universal supply input that can be powered by either 110–240 V AC or DC, enabling the operation of EKIP electronic trip units and auxiliary modules installed in the circuit breaker’s terminal box. This module ensures reliable internal power for protection, monitoring, communication, and advanced control functions of the breaker system across a wide range of breaker frame sizes (E1.2 to E6.2).

The ABB CA4‑22E is a 4‑pole front‑mounted auxiliary contact block designed to provide extra signaling and control contacts for contactors in industrial electrical systems. It mounts directly on compatible ABB contactors to extend their auxiliary contact capacity. The block includes two normally open (2 NO) and two normally closed (2 NC) instantaneous auxiliary contacts, making it useful for feedback, interlocking, and control logic applications