Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC FOXBORO GE HIMA Honey Well ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW TRICONEX Schenider Weidmueller Mitsubishi SICK FISHER
home
ABB
MT-110B
The ABB MT‑110B is a modular panel‑mounted potentiometer designed as a control operator device in industrial control panels and automation systems. It features a black knob and non‑illuminated design with a plastic bezel, intended for use where adjustable resistance control is needed—for example, adjusting speed references, intensity levels, or setpoints in control circuits. The modular design allows it to snap into compatible pilot device assemblies and integrates into standardized 22 mm cutouts found in control panels.

More details >> Request a Quote >>
ABB
MJS6-40B
The ABB MJS6‑40B joystick is a momentary industrial control joystick actuator designed for use in modular operator control systems. It provides directional control input in four directions (up/down/left/right) and is typically mounted in control panels, machinery control consoles, or automation interfaces. The joystick handle is supplied without contact blocks, allowing customization by fitting the appropriate contact modules to suit specific control requirements. It is a versatile pilot device used for manual control of motion, directional commands, or menu navigation in industrial environments

More details >> Request a Quote >>
ABB
RC5-2/440
The ABB RC5‑2/440 is a surge suppressor accessory designed to protect contactor coils and related control circuits from high‑energy overvoltage spikes. When an AC electromagnetic contactor coil is de‑energized, the stored magnetic energy can generate transient overvoltages that may interfere with electronics, damage insulation, or harm sensitive components. The RC5‑2/440 unit helps reduce peak overvoltage and suppress high‑frequency transient energy by damping these surge pulses. It attaches directly to the contactor or contactor relay and improves reliability and longevity of control circuitry in industrial motor control and automation systems.

More details >> Request a Quote >>
ABB
CP2-10R-10
The ABB CP2‑10R‑10 is a compact, maintained pushbutton switch designed for industrial control and operator interface applications. It features a flush red actuator with a black plastic bezel and is non‑illuminated. The button maintains its operated position when pressed (i.e., it does not spring back automatically). It is part of ABB’s compact range of pilot devices, suitable for panel mounting in machinery and automation control systems.

More details >> Request a Quote >>
ABB
CM-MSE
The ABB CM‑MSE is a thermistor‑based motor protection monitoring relay used to monitor the temperature of electric motors equipped with PTC (Positive Temperature Coefficient) temperature sensors. It evaluates the temperature rise directly from the motor windings through the sensors and provides a switching output that can be used to protect the motor from overheating conditions. The relay is designed for DIN‑rail mounting and features screw‑terminal connections, making it suitable for integration into control panels and industrial automation assemblies.

More details >> Request a Quote >>
ABB
MP3-30G
The ABB MP3-30G is a modular momentary pushbutton switch with a green, non-illuminated actuator and an extended head design. It is part of ABB’s modular pilot device range, intended for use in industrial control panels and automation equipment. The chrome metal bezel and rugged construction provide durability and reliability in demanding environments. It does not include a contact block and must be fitted with appropriate contact blocks or used with compatible control wiring to complete the circuit functionality.

More details >> Request a Quote >>
ABB
PSKP-1
The ABB PSKP-1 is a soft starter keypad / control panel interface used as an accessory for ABB soft starter units (such as the PST series). It functions as a user input interface allowing operators to configure, monitor, and control soft starter functions directly from the keypad. It is typically mounted on the soft starter enclosure or control panel and connects via the appropriate communication or control interface to the soft starter unit.

More details >> Request a Quote >>
ABB
A2X32-30-10
The ABB A2X32-30-10 is a three-pole AC contactor designed for industrial motor control and general power switching applications. It is part of ABB’s A2X/AX series of contactors, which are used to control three-phase motors, power circuits and auxiliary loads in automation systems, motor starters, and electrical distribution panels. This contactor features a compact block design with three main power poles and one built-in auxiliary contact for control signaling. It can be used with a variety of control coil voltages depending on the version.

More details >> Request a Quote >>
ABB
OFAFC000GG40
The ABB OFAFC000GG40 is a low-voltage fuse designed for industrial electrical protection applications. It is part of ABB’s FuseLine range of cylindrical fuses used to protect electrical circuits against overcurrent and short-circuit conditions. This type of fuse is typically used in power distribution panels, motor control centers, and other industrial electrical systems where reliable circuit protection is required.

More details >> Request a Quote >>
ABB
2TLA020054R0200
ABB 2TLA020054R0200 is a TINA 3A safety adapter unit designed for use with ABB DYNlink safety systems. It allows field safety devices containing two force-guided contacts, such as emergency stop buttons or safety switches, to be connected as inputs to a DYNlink safety loop. The adapter provides a compact interface solution that mounts on the device housing and enables easy integration of external safety contacts into automated industrial safety control circuits.

More details >> Request a Quote >>
1 2
···
369 370 371 372 373 374 375
···
5802 5803
Related products
ABB 3HEA800906-001: Modular Electronics Node Splitter, Precision Engineering for Industrial Automation -

The ABB 3HEA800906-001 Node Splitter is a precision-engineered component designed for seamless integration into industrial automation systems, enabling efficient data transfer and management in complex networks.
Allen-Bradley 1757-SRM System Redundancy Module -

The Allen-Bradley 1757-SRM System Redundancy Module provides robust redundancy for critical industrial control systems, ensuring high availability and reliability. Ideal for applications requiring continuous operation without downtime.
TO-2-1/E
Category Parameter Specification / Typical Value Application & Configuration Protected Circuit Signal circuits (e.g., 4-20 mA, digital I/O) Circuit Configuration 2-pole (Line-to-Line and Line-to-Ground protection) Connection In-series with the signal line Electrical Characteristics Nominal Voltage 8 - 24 V DC (Typical for signal applications) Max. Continuous Operating Voltage (Uc) ~30 V DC (Please verify in datasheet) Nominal Current (In) Up to 250 mA (Suitable for most signal loops) Voltage Drop < 1.5 V (Low, to minimize impact on the signal) Surge Protection Performance Standards Complies with IEC 61643-21 Nominal Discharge Current (In) 5 kA (8/20 μs waveform) Max. Discharge Current (Imax) 10 kA (8/20 μs waveform) Protection Level (Up) < 40 V (at In, typical for this class) General Data Mounting 35 mm DIN Rail Connection Type Screw terminals Housing Material Plastic (PA 6.6) Operating Temperature -40 °C to +80 °C Status Indication None (This is a basic model without visual fault indicator)