Products - Easy Semiconductor Technology (Hong Kong) Limited 易擇半導體科技(香港)有限公司

ABB

OFAFC1GG250

The ABB OFAFC1GG250 is a High Rupturing Capacity (HRC) fuse link designed for low‑voltage electrical protection in industrial and commercial power distribution systems. It is part of ABB’s range of DIN‑type HRC fuse links used with compatible fuse holders and switch‑fuse disconnectors to safeguard circuits against overcurrent, overload, and short‑circuit faults. This compact fuse link helps protect motors, feeders, transformers, and distribution panels by interrupting fault currents quickly and safely.

More details >> Request a Quote >>

ABB

E211-16-20

The ABB E211‑16‑20 is a compact 2‑pole ON‑OFF isolator switch designed for low‑voltage electrical control panels and modular DIN‑rail installations. It provides a simple manual switching function to turn circuits or loads ON and OFF, making it suitable for controlling indicators, fans, relays, lighting, and other electrical components in industrial and commercial environments. The device features a slim width that saves panel space and is part of ABB’s E210 series of modular command devices.

More details >> Request a Quote >>

ABB

AX09-30-01-84 AC110V

The ABB AX09‑30‑01‑84 is a 3‑pole AC contactor designed for switching and control of three‑phase electrical loads in industrial and commercial applications. It features a 110 V AC coil suited for control circuits operating at 110 V (50 Hz) or 110–120 V (60 Hz). As part of ABB’s AX contactor range, this block‑type contactor provides reliable performance for motor control, switching tasks, and general power circuits up to low‑voltage distribution levels.

More details >> Request a Quote >>

ABB

OFAFC1GG200

The ABB OFAFC1GG200 is a high‑rupturing‑capacity (HRC) DIN‑type fuse link designed for overcurrent protection in low‑voltage electrical distribution systems. It is part of ABB’s OFAFC family of gG‑characteristic fuse links, used to protect power circuits, feeders, motors, and control equipment from overloads and short circuits. This compact fuse link fits into compatible DIN fuse holders or switch‑fuse disconnectors to provide reliable fault interruption.

More details >> Request a Quote >>

ABB

PSR72-600-70

The ABB PSR72‑600‑70 is a compact 3‑phase soft starter designed for smooth starting and stopping of three‑phase motors in industrial and commercial applications. It reduces mechanical stress and electrical inrush current by controlling the voltage applied to the motor during start‑up and shutdown. This soft starter is part of ABB’s PSR series, optimized for space‑efficient motor control installations where frequent starts and stops are required.

More details >> Request a Quote >>

ABB

CM-PFE,1C/O 208-440VAC

The ABB CM‑PFE is a three‑phase monitoring relay designed to continuously monitor the health of three‑phase power systems. It detects phase sequence (correct order of phases) and phase failure/phase loss in three‑phase supplies with a voltage range of 208 V to 440 V AC. When used in control panels or distribution systems, it helps protect motors, contactors, and other three‑phase equipment from damage due to incorrect phase order or missing phase(s). The device provides a single changeover (SPDT) output contact for signaling or control actions based on the phase conditions.

More details >> Request a Quote >>

ABB

MP2-11W

The ABB MP2‑11W is a 22 mm modular illuminated pushbutton operator designed for industrial control panels and automation systems. It features a flush white actuator that stays in the selected (pressed) position (maintained action). The unit is part of ABB’s modular pilot‑device range and is supplied without a contact block, allowing you to configure the electrical switching contacts to suit your specific control requirements. It’s built for reliable use in demanding environments and offers high ingress protection on the front panel.

More details >> Request a Quote >>

ABB

CE4K1-10R-01

The ABB CE4K1‑10R‑11 is a compact emergency stop pushbutton designed for industrial control panels, machinery interfaces, and safety circuits. It features a red mushroom‑style actuator with a key release mechanism, allowing the button to be reset only with a key after it is pressed. This prevents accidental resetting and enhances safety. The device is part of ABB’s Compact pilot‑device range and is suitable for environments that require durable, clear emergency stop control.

More details >> Request a Quote >>

ABB

ASL16-30-01-81

The ABB ASL16‑30‑01‑81 is a 3‑pole DC‑coil contactor designed to control power circuits and three‑phase motors in industrial and automation applications. This block‑type contactor features a low‑power DC coil suitable for direct PLC output control and includes an integrated auxiliary contact for control logic feedback or interlocking functions. It is built for reliable switching of moderate load currents while maintaining a compact footprint for panel assemblies.

More details >> Request a Quote >>

ABB

A2N250 TMF250/2500 FF 3P

The ABB A2N250 TMF250/2500 FF 3P is a 3‑pole molded case circuit breaker (MCCB) from ABB’s FORMULA series. It provides reliable electrical protection by automatically interrupting overloads and short‑circuit conditions in low‑voltage power distribution systems. This compact breaker is suitable for industrial and commercial control panels where space‑efficient yet robust circuit protection is required.

More details >> Request a Quote >>