The ABB DPT‑CB011 is a dual‑power automatic transfer switch (ATS) controller used in electrical power distribution systems to automatically transfer load between two independent power sources (e.g., utility mains and a backup generator) when one source fails or returns to normal. It provides automatic change‑over and self‑recovery functionality with built-in control logic and safety features suitable for commercial and industrial applications. This controller can operate with compatible ATS switch assemblies and supports monitoring of voltage levels, phase presence, and alarms or delays during switching to ensure safe and reliable power continuity.

The ABB OTM_C10D 4P is a 4‑pole automatic transfer switch (ATS) / change‑over switch designed to provide reliable power source switching in three‑phase electrical systems. This type of device automatically transfers the load between two power sources — typically mains (utility) and an alternate source such as a generator or backup supply — when the primary source fails or returns to acceptable limits. It ensures continuity of electrical power for critical loads in industrial, commercial, or institutional applications.

The ABB DPT/SE 630 is a dual‑power automatic transfer switch (ATS) / change‑over switch designed for automatic or manual transfer of electrical loads between two independent power sources (such as utility mains and a backup generator) in three‑phase electrical systems. It is rated at 630 A to handle medium to high power loads in industrial, commercial, and infrastructure applications. This ATS ensures continuity of power supply by detecting loss or abnormal conditions on the primary source and transferring the load to an alternate source with safety interlocks to prevent both sources from being connected simultaneously. Models in this class are typically compliant with IEC standards and suitable for panel or enclosure mounting in power distribution systems.

The ABB OTM200E4CM230C is a motorized change‑over and transfer switch designed for automatic or remote switching of electrical loads between two independent AC power sources (such as utility mains and a backup generator) in three‑phase electrical distribution systems. It supports automatic operation when combined with control logic (e.g., ABB automatic transfer controllers) and also manual operation via an attached handle. This type of switch provides safe load transfer with mechanical interlocking to prevent simultaneous connection of both sources, making it suitable for industrial and commercial applications requiring reliable power continuity. OTM series switches are compliant with international IEC/EN standards for transfer and change‑over functionality

The ABB OTM80F4C12T380C is a 4‑pole automatic transfer switch (ATS) / motorized change‑over switch designed to automatically transfer electrical loads between two independent three‑phase AC power sources, such as utility mains and a backup generator. It ensures continuity of power in industrial, commercial, and critical infrastructure applications. The switch provides safe isolation between sources and can operate in both motorized automatic mode and manual mode via a handle. It is built to comply with international electrical standards and handle typical three‑phase power distribution requirements.

The ABB OTM63F4C12T380C is a 4‑pole automatic transfer switch (ATS) / motorized change‑over switch designed for automatic or remote switching of electrical loads between two independent three‑phase AC power sources (for example, utility mains and a backup generator). This device is part of ABB’s OTM series of compact automatic transfer switches intended for use in industrial, commercial, and critical power applications. It allows safe and reliable continuity of power by coordinating the transfer between source 1 and source 2 using a motor operator and control logic. The switch provides safe isolation and mechanical interlocking to prevent the paralleling of sources during transition.

The ABB OTM40F4C12T380C is a 4‑pole automatic transfer switch (ATS) / motorized change‑over switch designed to automatically transfer electrical loads between two independent three‑phase AC power sources — for example, between the utility mains and a backup generator — with minimal interruption. It is part of ABB’s Compact Automatic Transfer Switches (OTM_C_D) family, which provides reliable and safe switching for critical power continuity applications in industrial and commercial electrical distribution systems. These switches offer both automatic (motorized) operation and manual operation via a direct handle in emergencies.

The ABB OTM32F4C12T380C is a 4‑pole automatic transfer switch (ATS) / motorized change‑over switch engineered to transfer electrical loads between two independent three‑phase AC power sources (such as utility mains and a backup generator). It belongs to ABB’s family of motorized change‑over switches, which are designed to provide reliable and safe power source switching with both automatic (motorized) and manual operation. These switches incorporate safety interlocks and robust construction to prevent simultaneous connection of both power sources and to ensure continuity of power in industrial and commercial installations. ABB’s motorized change‑over switches are compact, easy to install, and conform to relevant IEC standards for transfer and change‑over applications.

The ABB OTM40E4C3D220C is a 4‑pole motorized change‑over and transfer switch designed to transfer electrical loads between two independent AC power sources (such as utility mains and a backup generator) in three‑phase electrical systems. It is part of ABB’s OTM_C series of motorized change‑over switches, which are engineered to provide reliable and safe switching with both automatic (via motor operator) and manual operation modes. The switch includes mechanical interlocks to ensure the two power sources remain isolated and cannot be connected to each other simultaneously. This makes it suitable for industrial, commercial, and critical power applications where continuity of supply is required.

The ABB OTM63F4C20D380C is a 4‑pole compact automatic transfer switch (ATS) / motorized change‑over switch designed to automatically transfer electrical loads between two independent AC power sources (such as utility mains and a backup generator) in three‑phase systems. It belongs to ABB’s OTM_C20D series, which offers reliable automatic change‑over functionality in industrial, commercial, and critical power applications. The switch supports both automatic operation and manual override and includes mechanical interlocks for safe source isolation, helping ensure continuity of power and protection against simultaneous source connection