Key Features:
Measurement Range: 0-3.0mm

Sensitivity: -7.87V/mm (optimized for steel)

Output: -2 to -18V DC (linear to gap)

Frequency Response: 0-10kHz

Robust Design: 316 stainless steel, IP67 rated

Temp Range: -30°C to +120°C (extendable to +180°C)

Applications:
✓ Turbine/compressor shaft vibration
✓ Rotor position monitoring
✓ Bearing condition analysis

Compatible with EPRO MMS6000 systems. Requires proper gap calibration.

Key Features:
✔ Range: 0–3.0 mm (non-contact measurement)
✔ Sensitivity: –7.87 V/mm (optimized for steel targets)
✔ Output: –2 to –18 V DC (linear to gap distance)
✔ Robust Build: 316 stainless steel, IP67 protection
✔ Temp Range: –30°C to +120°C (up to +180°C with HT cable)
✔ Frequency Response: 0–10 kHz (ideal for dynamic vibration)

Applications:

Turbine/compressor shaft vibration monitoring

Rotor position and bearing health tracking

Critical machinery protection systems

Key Features:
Measurement Range: 0–10 mm (factory calibrated)

Output: –2 to –18 V DC (linear to gap distance)

Sensitivity: –8.0 V/mm (optimized for steel targets)

Robust Design: Stainless steel housing, IP67 protection

Temperature Range: –30°C to +120°C (up to +180°C with HT cable)

Compatibility: Works with EPRO MMS6000 monitoring systems

Applications: Turbines, compressors, pumps, and critical rotating equipment requiring shaft vibration, radial/axial position, and rotor dynamics monitoring.

Key Features:
Measurement Range: ±50 g (±500 m/s²)

Wide Frequency Response: 0.5 Hz – 10 kHz

Output: 4–20 mA (loop-powered) or voltage signal

Extreme Durability: Stainless steel housing, IP67 rated

Operating Temp: -40°C to +120°C (higher with cooling option)

Flexible Mounting: Threaded stud or magnetic base

Applications: Pumps, motors, fans & compressors in power, oil/gas & heavy industries.

Key Features:
Input: Accepts signals from inductive sensors or proximity probes (0.5 Hz–15 kHz).

Speed Range: Configurable up to 30,000 RPM with adjustable pulses/revolution.

Outputs: Relay alarms/trips (SPDT) + 4–20 mA / 0–10 V analog output.

High Accuracy: ±0.1% deviation for precise speed control.

Robust Design: Supports 24V DC or 110/230V AC, operates in -20°C to +70°C.

Safety Certifications: ATEX, SIL (optional for hazardous areas).

Applications: Turbines, compressors, pumps, and gearboxes requiring overspeed protection.

Key Features:
Measurement Range: 0–4 mm (typical)

Output: –2 to –18 V DC (proportional to gap distance)

Sensitivity: –7.87 V/mm

Robust Design: Operates in harsh conditions (up to 120°C)

Compatibility: Integrates with EPRO MMS6000 and other monitoring systems

Applications: Turbines, compressors, pumps, and rotating equipment protection.

Key Features:
Eddy Current Principle: Measures distance between the sensor tip and conductive targets.

Operating Range: Typically 0–10 mm (adjustable based on setup).

Output: Analog signal (e.g., –2 to –18 VDC proportional to gap distance).

Robust Design: Suitable for harsh environments (high temps, oil, steam).

Compatibility: Works with EPRO monitoring systems (e.g., MMS6000).

Purpose:
Ultra-sensitive high-temperature displacement sensor for precision monitoring in extreme environments.

Key Features:

20.0 mV/µm sensitivity (0-0.5mm range)

High-temp operation: -40°C to +200°C (peak 250°C)

Ruggedized design:
✓ 20g vibration resistance
✓ 4MPa pressure rating
✓ M10×1 threaded probe

Applications:
✔ Gas turbine blade clearance
✔ Nuclear pump monitoring
✔ Precision machinery in high heat

Requirements:
• Mineral-insulated cable (>105°C)
• Signal conditioner recommended

Compliance: API 670, ASME B31.1

Core Function:
High-temperature eddy current sensor for extreme environment displacement monitoring.

Key Features:
• Sensitivity: 8.0 mV/µm (±5%)
• Range: 0-1.0mm (1000µm)
• Temp Rating: -40°C to +200°C (peak 250°C)
• Frequency Response: DC to 10kHz

Robust Design:
✓ 8mm high-temp probe
✓ M10×1 threaded mount
✓ 20g vibration resistance
✓ 4MPa pressure rating

Applications:

Gas turbine hot sections

Steam turbine monitoring

High-temp industrial equipment

Compliance: API 670

Purpose:
Heavy-duty eddy current sensor for vibration/displacement monitoring in extreme industrial environments.

Key Features:

8.0 mV/µm sensitivity (0-1.0mm range)

Ruggedized /13R design:
✓ IP68 protection
✓ 25g vibration resistance
✓ 6MPa pressure rating

Wide temp range: -40°C to +150°C

Applications:
✔ Offshore compressors
✔ Mining equipment
✔ High-vibration machinery

Compliance: API 670
Options: ATEX/IECEx versions available