The Emerson TD2000-4T1320P is a general-purpose inverter with:
3-phase 380V/50-60Hz input (±15% voltage, ±5% frequency tolerance)
0-380V/0-99.99Hz output
150% overload for 2min, 180% for 10s
0.1% speed accuracy with PG
-10℃~+40℃ operation (derate above 40℃)
IP20 protection, wall-mounted design.

The Emerson NE300-4T0185G/0220PB is an inverter with:
- 3-phase 380-440V/50-60Hz input (304-456V range)
- G-type: 150% overload for 1min, 180% for 20s; P-type: 120%/1min, 150%/1s
- Control modes: VC (with PG), SVC (without PG), V/F
- Starting torque: 150% at 0.5Hz (SVC), 1.5Hz (V/F)
- Speed range: 1:100 (SVC), 1:50 (V/F)
- Frequency: 0.00-550.0Hz
- IP20 protection, -40°C~+70°C storage temp.

The Emerson GM150CY/150A is a medium - voltage converter. It has a power rating of 10 – 24 MVA (IGCT). For output, it offers 3 - phase AC 3.3 kV (IGCT Water; Tandem configuration: Water 2 x 3.3 kV). The input voltage operates at 50 / 60 Hz ± 3%, with an output frequency range of 0 – 250 Hz. Protection classes vary: Air - cooled models are IP22 / IP42, while Water - cooled ones are IP43 / IP54. It can reach a maximum speed of 4800 rpm and handle up to 18 MW of power.

The Emerson G100AY is a high-voltage inverter with 6kV/10kV (+15% - 45%) input, 50Hz±10% frequency. It offers 2x overload capacity, high low-speed torque, 100% PWM rectification, regenerative power matching output, 200% braking torque, and 0.99 power factor.

The Emerson SP6401 is a Unidrive SP series VFD. It features:
3-phase 380VAC input, 0~380VAC output
0~3000Hz open-loop/0~40000rpm closed-loop speed control
150% overload for 60s (heavy load)
0.01% control accuracy, 0.001Hz resolution
16kHz carrier frequency, 500kHz encoder response
Built-in EMC filter & Modbus RTU (115200bps)
IP54 protection (reference only)

The Emerson MP210A4R is a DC drive with 208-480VAC 3-phase input and 210A output. It offers 60hp at 230VAC and 125hp at 460VAC, supporting regenerative braking with forced air cooling. Operating at 0℃-55℃, it has standard RS485 and optional CANopen/DeviceNet/Ethernet interfaces. Sized 17.5×11.5×9.9 inches (29 lbs), it suits industrial motor control applications.

The Emerson UNI5401 is a VFD with up to 11kW output. It operates on 230VAC±10% (45-65Hz input), has IP20 protection, and supports Modbus TCP/IP, DeviceNet, and EtherCAT. Featuring overload/short-circuit/under-voltage motor protection, it offers ±0.01% speed control accuracy and a 0.99 power factor, with an RS485 comm interface.

The Emerson SPMD1604 is a 1600V/400A smart power module for motor control. It integrates a 3-phase IGBT inverter with gate drivers, supporting 600-1600V DC bus and 400A continuous current (800A peak). Switching up to 20kHz, it operates at -40°C to +125°C with overcurrent/overtemperature/under-voltage protection. Designed for industrial drives and renewables, its press-fit package enables easy installation.

The Emerson MP1850A6 is a precision air conditioner outdoor unit. It offers 18.5kW cooling at 24℃/50%RH with 4200m³/h air volume. Sized 950×400×1245mm (85kg), it uses R410A and a Copeland scroll compressor. With wide-voltage input and overload protection, it operates at -15℃~+45℃ (standard) or -34℃ with a low-temp kit. Features include RS485 monitoring, auto-restart, and flexible standby switching for reliable use in comms/IT environments.

The Emerson FX-316 is a precision air-con outdoor unit. It delivers 16kW cooling (15.1kW sensible) at 24℃/50%RH with 4000m³/h airflow. Sized 950×400×1245mm (80kg), it uses R410A and a Copeland scroll compressor. With wide-voltage input and overload protection, it operates at -15℃~+45℃ (standard) or -34℃ with a low-temp kit. Features include RS485 monitoring, auto-restart, and flexible standby switching for comms/IT rooms.