The ABB PSKP-1 is a soft starter keypad / control panel interface used as an accessory for ABB soft starter units (such as the PST series). It functions as a user input interface allowing operators to configure, monitor, and control soft starter functions directly from the keypad. It is typically mounted on the soft starter enclosure or control panel and connects via the appropriate communication or control interface to the soft starter unit.

The ABB A2X32-30-10 is a three-pole AC contactor designed for industrial motor control and general power switching applications. It is part of ABB’s A2X/AX series of contactors, which are used to control three-phase motors, power circuits and auxiliary loads in automation systems, motor starters, and electrical distribution panels. This contactor features a compact block design with three main power poles and one built-in auxiliary contact for control signaling. It can be used with a variety of control coil voltages depending on the version.

The ABB OFAFC000GG40 is a low-voltage fuse designed for industrial electrical protection applications. It is part of ABB’s FuseLine range of cylindrical fuses used to protect electrical circuits against overcurrent and short-circuit conditions. This type of fuse is typically used in power distribution panels, motor control centers, and other industrial electrical systems where reliable circuit protection is required.

ABB 2TLA020054R0200 is a TINA 3A safety adapter unit designed for use with ABB DYNlink safety systems. It allows field safety devices containing two force-guided contacts, such as emergency stop buttons or safety switches, to be connected as inputs to a DYNlink safety loop. The adapter provides a compact interface solution that mounts on the device housing and enables easy integration of external safety contacts into automated industrial safety control circuits.

ABB NSL44E-88 is an 8-pole contactor relay designed for switching auxiliary and control circuits in industrial automation systems. It is commonly used in control panels, machine control interfaces, PLC logic control and signal interlocking applications. The device operates using a DC coil and provides reliable switching performance with compact construction suitable for space-limited installations.

The ABB M2SS2‑11C is a compact selector switch operator designed for industrial control panels and machine operator stations. It features a short rotary handle with a rugged, industrial‑grade housing. The switch provides two maintained positions for selecting between control states (for example, ON/OFF or two operating modes). The device includes one normally open (NO) and one normally closed (NC) contact for flexible control logic or feedback indication. Its 22 mm panel mount and robust construction make it suitable for use in automation systems, machinery controls, and electrical distribution panels where reliable manual selection input is required.

The ABB OFAFC00GG125 is a high‑rupturing‑capacity (HRC) DIN‑type fuse link used for overcurrent protection in low‑voltage electrical systems. It is part of ABB’s range of gG full‑range protective fuse links, designed to safely interrupt both overload and short‑circuit faults in distribution and industrial circuits. The fuse link is installed into a compatible fuse holder or switch‑fuse (e.g., ABB OS or OT series fusible disconnects) to protect conductors, switchgear, transformers, and other electrical components. This fuse element provides fast and reliable clearing of fault currents while limiting let‑through energy to reduce damage to equipment and maintain selectivity in power systems.

The ABB C2SS2‑10B‑20 is a compact 2‑position rotary selector switch designed for use in industrial control panels, machine operator stations, and automation systems. It features a black short rotary handle with a metal bezel and provides a maintained switching action between two positions. The switch includes one normally open (NO) and one normally closed (NC) auxiliary contact for control logic or indication feedback. Its rugged construction and standardized 22 mm panel‑mount cut‑out make it suitable for demanding industrial environments, offering reliable selection input for control circuits, mode selection, or manual overrides.

The ABB AUX‑C 3Q1SY‑Cabled 250 VAC/DC (T1‑T3) is an auxiliary contact accessory designed to be fitted to ABB SACE Tmax T series molded‑case circuit breakers (frames T1, T2, T3). It provides remote electrical signaling of the breaker’s status, adding multiple changeover (SPDT) contacts that reflect the mechanical position of the breaker and a dedicated contact for trip indication. The pre‑wired module comes with a cable for easy connection into control and monitoring circuits. This auxiliary contact block is used where additional feedback (breaker ON/OFF) and trip condition indication are required for PLCs, annunciators, control logic, or alarm systems in industrial electrical distribution panels.

The ABB 2TLA020054R1210 is an industrial safety interface adapter used to integrate safety output signal devices (OSSD) from optical safety sensors and barriers into a DYNlink control loop. It is part of ABB’s series of safety adapters that bridge standard safety component outputs (such as emergency stop contacts, light curtains, and safety switches) with DYNlink‑based safety networks used in machine safety systems and PLC‑based controllers.