The ABB PR121/P 2500A circuit breaker is a low‑voltage air circuit breaker (ACB) from ABB’s SACE Emax / E3N/E3S series designed for heavy‑duty electrical distribution protection. It combines a PR121/P electronic trip unit with a breaker frame capable of handling continuous 2500 A current. The trip unit provides adjustable overload, short‑circuit, and earth‑fault protection functions to safeguard electrical feeders, busbars, and connected loads in commercial and industrial switchgear applications.

The ABB SACE T6D 630 is a molded‑case circuit breaker / switch‑disconnector designed for low‑voltage electrical distribution and protection in industrial and commercial installations. It belongs to the Tmax T6D product range and is rated for a nominal current of 630 A. This breaker provides a reliable method to interrupt and isolate electrical circuits under overload and short‑circuit conditions, as well as to act as a manual load disconnector where required.

The ABB E2N 2000A is a low‑voltage air circuit breaker (ACB) from ABB’s Emax 2 E2N series, engineered for electrical distribution and protection in industrial, commercial, and utility power systems. These breakers are designed to provide reliable overload, short‑circuit, and fault protection for heavy‑duty electrical installations.

The ABB E1.2N 1600 Ekip Touch LSI 3p WMP is a withdrawable low‑voltage air circuit breaker from ABB’s Emax2 E1.2 series, designed for protection and control of electrical distribution systems in industrial and commercial installations. It is a three‑pole breaker rated for 1600 A continuous current with integrated electronic protection (Ekip Touch LSI) that provides adjustable overload, short‑circuit, and earth‑fault protection functions.

The ABB 61000602 is a Geared Motor Device used primarily as a motor operator for electrical equipment such as circuit breakers and similar industrial automation devices. It is designed to provide controlled mechanical actuation (opening/closing) using an internal geared motor mechanism, suitable for industrial applications requiring reliable motorized operation.

The ABB VD4M‑1206‑25 is a medium‑voltage vacuum circuit breaker designed for electrical power distribution and protection in industrial, utility, and infrastructure installations. It uses vacuum interrupter technology, which provides reliable interruption of current in medium‑voltage systems with minimal contact wear, high dielectric strength, and long lifecycle. VD4 series breakers are widely deployed globally thanks to their proven reliability and safety performance in medium‑voltage switchgear applications

The ABB PR122/P‑LSI is an advanced electronic protection trip unit designed for use in ABB low‑voltage circuit breakers (such as E3S and similar breaker families) for 3‑pole, high‑current applications up to 2500 A and 3200 A. It provides comprehensive overcurrent protection by integrating multiple protection stages — Long‑time (L) for overloads, Short‑time (S) for delayed short‑circuit response, Instantaneous (I) for immediate fault clearing, and (where supported) Ground‑fault (G) detection. The PR122/P‑LSI unit is microprocessor‑based and allows adjustable protection settings for precise coordination with upstream and downstream protective devices. It can be configured via front panel interfaces or external programming tools, offering flexibility for industrial power distribution, main feeder protection, and motor feeder applications.

The ABB A210‑30‑11‑84 (1SFL511001R8411) is a three‑phase contactor designed for industrial and commercial power switching applications. It is used for motor starting, isolation, bypass switching, and distribution switching in electrical circuits up to 690 V AC. The device operates via an electromagnetic coil and is suitable for use with AC control voltages of 110 V 50 Hz or 110‑120 V 60 Hz, allowing flexible integration into different systems. It is built with rugged mechanical and electrical durability for frequent operation and can be combined with auxiliary contacts and accessories for enhanced control and feedback functionality.

The ABB PR122/P‑LSIG is an advanced electronic trip unit designed for use with ABB SACE series low‑voltage air circuit breakers. It integrates sophisticated microprocessor‑based protection logic to provide comprehensive circuit protection against overloads, short‑circuit currents, instantaneous faults, and ground (earth) faults. The unit supports adjustable protection stages — L (long‑time), S (short‑time), I (instantaneous), and G (ground fault) — giving flexible coordination and discrimination for power distribution and motor feeder applications. The trip unit also offers self‑diagnosis, event logging, and easy configuration via a front interface or external programming tool, making it suitable for industrial and commercial electrical systems requiring high levels of safety and reliability

The ABB T6S800 PR222DS/P‑LSI is a heavy‑duty three‑pole molded case circuit breaker (MCCB) from ABB’s Tmax T6 series, designed for protection and switching of low‑voltage electrical distribution systems. It integrates an electronic trip unit (PR222DS/P‑LSI) that delivers adjustable long‑time, short‑time, and instantaneous protection for overloads and short circuits with high performance level. This breaker is intended for fixed‑mount installations in electrical switchboards, industrial power panels, and main distribution circuits where reliable circuit protection and high breaking capacity are required. It conforms to international industrial standards for durability and safety in industrial power distribution.