Technical Parameters Parameter Category Specification Details General Model M22-LED-W M22 Connector, LED Indicator, Color "W" (White) Product Line Eaton M22 Cordsets / Sensor-Actuator Cables Connector Characteristics Connector Type M22 (Standard metric threaded connection) Thread Pitch M22 x 1.5 Pin Configuration Most commonly 4-pin (This is a critical specification to verify from the datasheet). Coupling Standard M22 locking nut. LED Indicator LED Color W - White Voltage for LED Operates from the connected circuit's voltage (e.g., 10-30V DC). It may include a built-in current-limiting resistor. Cable Characteristics Cable Type Pre-wired, shielded or unshielded, with flying leads (open ends). Cable Length Available in standard lengths (e.g., 2 meters, 5 meters). The specific length is not encoded in the model number and must be specified or confirmed separately. Cable Jacket Typically PVC or PUR, offering flexibility and resistance to oil and chemicals. Wire Gauge Commonly 0.34 mm² (AWG 22) or similar. Electrical Ratings Rated Voltage Typically up to 30V DC / 250V AC Rated Current Typically 2A per pin / 4A overall IP Rating IP67 when properly connected and locked (Dust-tight and protected against temporary immersion).
