Technical Specifications Category Specification Model Type 6010 Type Pneumatic Force-Balance Pressure Transmitter Input Signal Process Pressure (Gauge, Absolute, or Differential) Output Signal 3 to 15 psig (0.2 to 1.0 bar) Supply Air Pressure 20 psig (1.4 bar) minimum. Typically supplied at 20-35 psig. Air Consumption Approximately 0.15 SCFM (4.25 standard liters per minute) at maximum output. Accuracy Typically ±0.5% of span (including linearity, hysteresis, and dead band). Sensing Elements Available in various types for different pressure ranges: • Bourdon Tube: For higher pressures. • Diaphragm: For lower pressures or differential pressure. Pressure Ranges Available in a wide variety of spans, from a few inches of water column to several thousand psig. Case Material Cast Aluminum or Fiberglass Wetted Parts Materials Stainless Steel, Monel, Hastelloy, etc., depending on the process fluid. Ambient Temperature Limit -20° to +140°F (-29° to +60°C) Mounting Directly to process connection (e.g., 1/2" NPT) or with a separate mounting bracket.
