Key Features Selector Type: 3‑position maintained rotary switch — remains in the selected position until manually changed. Actuator: Short red handle for easy manual operation. Illumination: Non‑illuminated design. Compact Construction: Space‑efficient form factor for panel mounting. Robust Design: Suited for industrial environments. Electrical Ratings Contact Configuration: 2 Normally Open (2 NO) auxiliary contacts for switching control circuits. Rated Operational Voltage: Suitable for low‑voltage AC and DC control circuits — up to ~300 V. Rated Operational Current: Typical AC control duty currents (e.g., ~1 A at 220–240 V AC). DC control duty at lower voltages (e.g., 24–125 V DC). Insulation: Designed for safe use within IEC/low‑voltage control standards. Switching Categories: Suitable for pilot/control duty loads. Mechanical & Environmental Positions: Three maintained positions (e.g., A, B, C). Mechanical Durability: Designed for a high number of actuation cycles. Operating Temperature: Typical industrial ambient range (approx. –25 °C to +70 °C). Storage Temperature: Broader storage range. Front Protection: Good dust and splash resistance when installed properly; basic terminal protection when panel‑mounted. Physical & Installation Panel Cut‑out: Standard 22 mm diameter for pilot devices. Body/Bezel: Chrome metal front bezel with durable plastic housing. Terminals: Screw‑type terminals for secure wiring. Dimensions: Slim profile for dense panel layouts. Typical Applications Mode selection in control panels (Off/Auto/Manual, Forward/Off/Reverse). Operator interfaces for machinery and automation equipment. PLC and relay logic inputs requiring manual position selection. Control logic switching where a simple, reliable 3‑position input is needed.