Technical Parameters Parameter Specification / Decoding Product Line ABB Cable Glands / Cable Accessories Type Plastic Cable Gland, EMC Shielding Type (Metal-Sprayed) Part Number Decoding CL-100Gywms • CL: Likely denotes Cable Level or Clamp series. • 100: The entry thread size. This is M40x1.5 (Metric 40mm thread, pitch 1.5mm). This is the size that screws into the enclosure. • G: Likely indicates a specific gland series or design (e.g., standard straight-through). • yw: Yellow-White color, typically associated with PA12 Polyamide material (good mechanical strength, UV resistance, chemical resistance). • ms: Metal-Sprayed (EMC version). Provides conductivity for grounding cable screens. Thread Size (Enclosure Entry) M40 x 1.5 (Metric) Sealing Range (Cable Ø) Typically 13 - 25 mm (This is the outer diameter range of the cable sheath that the gland can effectively clamp and seal). (Must verify with official datasheet) Material (Body & Nut) Polyamide 12 (PA12), Halogen-free, V0 flammability rating. Color: Yellow-White (RAL-like). EMC Shielding Yes. Metal-sprayed surface provides contact for cable screens/shields. Surface Resistance: Typically < 100 mΩ. Sealing Ring Material Often Silicone (SI) or EPDM rubber, integrated. Ingress Protection (IP Rating) Up to IP68 / IP69K when properly installed on a compatible enclosure and cable. Temperature Range -40°C to +100°C (for PA12 material, stationary use). UV Resistance Good (typical for PA12 yellow-white material). Standards Compliance IEC 62444 (Cable glands). EMC: Contributes to compliance with IEC/EN 61000-6-2 and -6-4. RoHS & REACH compliant. Corrosion Resistance Excellent resistance to oils, fuels, and many chemicals. Mounting Torque Refer to datasheet (e.g., 40-50 Nm for M40 size). Certifications May have UL, CSA, GL (marine) depending on specific variant.