Specifications General Type: Electro-Hydraulic Servo Valve Series: 266HSH Model: 266HSHPM1T8ENL112YMH3 Application: Precise hydraulic control for industrial machinery Mounting: Standard manifold or subplate mounting Hydraulic Characteristics Nominal Flow Rate (Qn): 8 L/min Nominal Pressure (P): 210 bar Maximum Operating Pressure: 350 bar Rated Spool Stroke: 8 mm Control Type: Proportional / servo control with electronic feedback Hydraulic Fluid: Mineral oil, HLP type, viscosity 15–75 cSt Electrical Characteristics Control Signal: ±10 V DC or 4–20 mA (depending on controller interface) Supply Voltage: 24 V DC (typical) Electrical Bandwidth: 100–200 Hz (typical) Response Time: <10 ms typical Feedback Sensor: Linear position transducer (LVDT) integrated Mechanical & Construction Housing Material: High-strength aluminum and steel alloy Seals: Nitrile (NBR) or optional Viton (FKM) Weight: Approx. 2.5–3.0 kg Mounting Interface: ISO 10372 / CETOP standards Protection Class: IP65 (with appropriate connectors) Environmental Conditions Operating Temperature: –20 °C to +70 °C Storage Temperature: –40 °C to +80 °C Humidity: 0–95% RH, non-condensing Standards & Certifications Standards Compliance: ISO 10372, DIN EN 1751 Safety & EMC: CE marked, industrial EMC compliance Approvals: Custom industrial approvals depending on installation Features High-precision proportional hydraulic control Low hysteresis and high dynamic response Integrated position feedback for closed-loop control Robust industrial construction suitable for demanding environments Compatible with ABB motion control systems and controllers Easy integration into standard hydraulic manifolds or subplates