Parameters Category Parameter Specification for CAL18-11 General Type Heavy-Duty, Precision Snap-Action Limit Switch Series CAL (Component Automation) Series Contact Configuration SPDT (Single Pole, Double Throw) - 1 NO (Normally Open) + 1 NC (Normally Closed) Actuator Type (Typical for -11) Roller Lever, Right-Angle Return Electrical Ratings Rated Insulation Voltage (Ui) 500 V Utilization Categories (IEC 60947-5-1) AC-15: Control of electromagnetic loads (coils) DC-13: Control of DC electromagnetic loads Rated Operational Current (Ie) 10 A at 250 V AC 0.3 A at 250 V DC Rated Thermal Current (Ith) 10 A Switching Capacity AC: Make/Break: 10A, 250V, cos φ=0.65 DC: Make/Break: 0.3A, 250V, L/R=40ms Electrical Life > 1 million operations (at rated load) Mechanical Characteristics Mechanical Life > 10 million operations Operating Force Approx. 2.5 - 4 N (depends on actuator) Release Force ≥ 0.5 N Pretravel/Overtravel Specific to actuator; e.g., ~15° pretravel, ~20° overtravel for lever type. Repeat Accuracy ±0.1 mm (typical) Terminals Connection Type Screw clamp terminals Terminal Capacity Up to 2 x 1.5 mm² or 1 x 2.5 mm² Torque 0.5 - 0.6 Nm Environmental & Construction Housing Material Thermoplastic (PBT) or Die-Cast Zinc Sealing / Protection Degree IP65 (Dust-tight and protected against water jets) Operating Temperature -25°C to +85°C (Ambient) Ambient Humidity ≤ 93% RH (non-condensing) Vibration Resistance 10 - 55 Hz, 0.75 mm amplitude Shock Resistance 30 G, 11 ms Mounting & Actuator Mounting 2 x M4 mounting holes, standard footprint. Actuator Travel Varies; common lever travel is ~90° total. Actuator Options Various roller materials (Nylon, Metal), lever lengths, and return springs available. Standards & Approvals Compliance Standards IEC 60947-5-1, EN 60947-5-1 Certifications CE, cULus