Technical Specifications | Parameter Category | Specification / Inference | | :--- | :--- | :--- | | Product Type | Switched-Mode DC/DC Converter (Single Output) | | Product Family | ABB CP (Control Power) or similar range. 2TAZ is the characteristic prefix. | | Standard | IEC 62368-1, IEC 61204-7 | | Input Voltage (Uin) | Defined by code segment 220301. This is the most critical parameter to verify. It is highly likely a common industrial DC voltage. Based on pattern: • A very strong possibility is 110 V DC (with a wide range, e.g., 80-150V DC). • Other possibilities: 24V DC, 48V DC, or 220V DC. Must be confirmed via datasheet or nameplate. | | Output Voltage (Uout) | Regulated 24 V DC. The code R2251 is key: • R: Regulated. • 22: Likely a sub-series or design code. The output voltage is most probably the industry-standard 24V DC, not 22V. • 51: Likely indicates the output current rating. 51 often decodes to 5A (where 5=5A, 1=version or check digit). | | Output Current (Iout) | Likely 5 A (Inferred from 51 in R2251). | | Output Power (Pout) | Approximately 120W (If output is 24V/5A: 24V * 5A = 120W). | | Output Characteristics | • Voltage regulated (±1-2%). • Short-circuit, overload, and overvoltage protected. • Galvanic isolation (typically 3-4 kV). • Low ripple and noise. | | Efficiency | > 85% (typical for this class). | | Mounting | 35 mm DIN Rail mounting. | | Terminations | Screw-clamp terminals. | | Operating Temperature | -25°C to +70°C (Industrial temperature range). | | Cooling | Natural convection (fanless). | | Protection Degree | IP20. | | Status Indication | LED power indicator. | | Safety Approvals | CE, UL, cULus. | | Typical Application | Installed in: • Low-voltage switchgear (e.g., MNS). • Motor control centers. • Automation cabinets. Function: To supply 120W of 24V DC power to devices such as: • PLCs and their I/O modules. • Protective relays (e.g., ABB REF615). • Sensors, transducers, and HMI panels. |