Parameter Category Specification / Inference Product Type Switched-Mode DC/DC Converter (Power Supply Module) Product Family ABB CP-S (Control Power) or similar range. 2TAZ is a common prefix for this family. Standard IEC 62368-1, IEC 61204-7 Input Voltage (Uin) Wide-range DC input. The code segment 220301 defines the exact range. A highly probable and common input is 110-150 V DC (compatible with standard 110V DC control systems). Other possibilities include 24V, 48V, or 220V DC. This must be verified from the datasheet. Output Voltage (Uout) Regulated 24 V DC. This is strongly indicated by the R24 portion of the code R2504. The R stands for "Regulated". (Note: R25 is unusual; it might be a specific series code, but the output is highly likely 24V DC for industrial control). Output Current (Iout) / Power (Pout) The 04 in R2504 typically indicates the output current rating. Likely 4 A at the rated output voltage. • If output is 24V DC: Power = 24V * 4A = 96W. • If output is another voltage: Power scales accordingly. Output Power (Typical) Approximately 100W (e.g., 24V/4A or 48V/2A). Output Characteristics • Voltage regulated. • Short-circuit and overload protected. • Electrical isolation between input and output (typically 3-4 kV). • Low output ripple. Efficiency Typically >85%. Mounting 35 mm DIN Rail mounting. Terminations Screw-clamp terminals for secure connection. Operating Temperature -25°C to +70°C (industrial grade). Storage Temperature -40°C to +85°C. Protection Degree IP20 (for installation inside an enclosure). Cooling Convection cooled (no fan). Status Indication LED for power/operation status. Safety Approvals CE, UL, cUL, etc. Typical Application Installed in: • Low-voltage switchgear (MNS, ArTu). • Motor control centers (MCCs). • Automation panels. Function: To supply power to 24V DC devices (PLCs, I/O cards, relays, indicators) from a 110V DC or other primary DC bus.