Technical Data Parameter Specification / Value Drive Series & Model ABB ACS510 General Purpose Drive Product Code ACS510-01-05A6-4 Rated Output Power 2.2 kW (3.0 HP) Rated Output Current 5.6 A (Decoded from "05A6": 05 = 5.x Amps, A=6 in hex, so 5.6A) Input Supply Voltage 3-phase, 200 - 240 V AC (±10%) (*The "-01" suffix specifies this voltage range*) Input Supply Frequency 47 - 63 Hz Output Frequency Range 0.1 - 500 Hz Control Method Scalar Control (Volts/Hertz) with advanced motor control enhancements. Enclosure Class IP21 / UL Type 1 (Chassis Type). Designed for mounting inside a protective electrical enclosure. Built-in Standard EMC Filter Yes, Class A (Industrial environment). Fieldbus Interface Integrated Modbus RTU (RS-485). Digital/Analog I/O 3 Digital Inputs (DI) 1 Digital Output (DO) - Relay 1 Analog Input (AI) (configurable as 0/4-20 mA or 0-10 V) 1 Analog Output (AO) (0/4-20 mA) Key Application Features • Dual Independent PID Controllers • Sleep/Wake & Catch a Spinning Motor • Auto Energy Optimization (AEO) • Customizable U/F Curves (e.g., quadratic for fans) • Flying Start Overload Capacity 110% of rated current for 60 seconds (suited for centrifugal pump/fan loads). Braking Chopper Not internally integrated. Requires an external brake resistor module for applications requiring fast deceleration or overhauling loads. Protection Features Full suite: Motor thermal (I²t) protection, overcurrent, short circuit, ground fault, over/under voltage, input phase loss, etc. Operating Temperature -15°C to +40°C (without derating). Up to +50°C with current derating. Storage Temperature -40°C to +70°C Relative Humidity < 95% RH, non-condensing Mounting Wall mounting or on DIN rail (using optional adapter). Approvals & Standards CE, cULus, RoHS, IEC 61800-5-1, EN 61800-3.