Technical Data Parameter Specification / Value Drive Series & Model ABB ACS510 General Purpose Drive Product Code ACS510-01-04A1-4 Rated Output Power 1.5 kW (2.0 HP) Rated Output Current 4.1 A (This aligns with the "04A1" code: 04 = 4.x Amps, 1 = .1) Input Supply Voltage 3-phase, 200 - 240 V AC (±10%) (*The "-01" denotes this specific low-voltage range*) Input Supply Frequency 47 - 63 Hz Output Frequency Range 0.1 - 500 Hz Control Method Scalar Control (Volts/Hertz - V/Hz) with flux optimization. Enclosure Class IP21 / UL Type 1 (Chassis Type). Requires installation in a proper enclosure for full protection. Built-in Standard EMC Filter Yes, Class A (Standard). Limits electromagnetic interference. Fieldbus Interface Integrated Modbus RTU via RS-485. Digital/Analog I/O 3 Digital Inputs (DI) 1 Digital Output (DO) - Relay 1 Analog Input (AI) (0/4-20 mA or 0-10 V) 1 Analog Output (AO) (0/4-20 mA) Key Application Features • Dual PID Controllers • Sleep/Wake Function • Flying Start • Auto Energy Optimization (AEO) • Pump/Fan-specific curves Overload Capacity 110% of rated current for 60 seconds (Light overload capacity, suitable for centrifugal loads). Braking Chopper Not built-in. Supports connection of an external brake resistor for deceleration or holding loads. Protection Features Comprehensive: Motor thermal (I²t) overload, short circuit, ground fault, overvoltage, undervoltage, phase loss, etc. Operating Temperature -15°C to +40°C (full rated output). Up to +50°C with derating. Storage Temperature -40°C to +70°C Relative Humidity < 95% RH, non-condensing Mounting Wall mounting or on DIN rail (with optional adapter kit). Approvals & Standards CE, cULus, RoHS, compliant with IEC 61800-5-1, EN 61800-3.