Technical Data Parameter Specification / Value Drive Series & Model ABB ACS510 General Purpose Drive Product Code ACS510-01-03A3-4 Rated Output Power 1.1 kW (1.5 HP) Rated Output Current 3.0 A (This aligns with the "03A3" code: 03 = 3.0 Amps) Input Supply Voltage 3-phase, 200 - 240 V AC (±10%) (*Note: The "-01" in the model typically indicates this 200-240V range*) Input Supply Frequency 47 - 63 Hz Output Frequency Range 0.1 - 500 Hz Control Method Scalar Control (Volts/Hertz - V/Hz) with energy-saving optimization. Enclosure Class IP21 / UL Type 1 (Chassis Type). Provides basic finger and drip protection. Must be installed in a suitable cabinet for full environmental protection. Built-in Standard EMC Filter Yes, Class A. Limits conducted and radiated emissions for industrial environments. Fieldbus Interface Integrated Modbus RTU via RS-485. Digital/Analog I/O 3 Digital Inputs (DI) 1 Digital Output (DO) - Relay 1 Analog Input (AI) (configurable as 0/4-20 mA or 0-10 V) 1 Analog Output (AO) (0/4-20 mA) Key Application Features • PID Controller (2 independent sets) • Sleep/Wake Function • Flying Start • Auto Energy Optimization Overload Capacity 110% of rated current for 60 seconds (for light-duty applications like pumps/fans). Braking Chopper Not built-in. An external brake resistor can be connected for dynamic braking requirements. Protection Features Motor thermal (I²t) protection, overcurrent, overvoltage, undervoltage, short circuit, ground fault, etc. Operating Temperature -15°C to +40°C (without derating). Up to +50°C with current derating. Storage Temperature -40°C to +70°C Relative Humidity < 95% RH, non-condensing Mounting Wall or DIN rail mounting (with optional adapter) Approvals & Standards CE, cULus, RoHS, compliant with IEC 61800-5-1, EN 61800-3