Technical Specifications: Parameter Category Specification Detail Model Designation ACH550-01-012A-4 Product Series ABB ACH550 HVAC Drive Rated Power 5.5 kW (7.5 HP) Output Current 12.0 A (at 400V, continuous duty) Supply Voltage 3-phase, 380 - 480 V AC (±10%), 50/60 Hz Output Voltage 0 - Supply Voltage (Uin) Output Frequency Range 0.1 - 500 Hz (Standard HVAC application range: 0.1 - 120 Hz) Control Methodology Sensorless Flux Vector Control (FVC) with automatic energy optimization Control Characteristics - Speed control accuracy: ±0.1% of nominal speed (with auto-tuning) - Torque control response time: 5-10 ms - Speed control range: 1:100 (open loop) Enclosure Rating IP20 / UL Type 1 (Open Chassis) - Requires installation in appropriate control panel Physical Frame Size R2 Key Application Features - Adaptive Programming (AP) with plain-language setup wizard - Energy Optimizer with real-time efficiency monitoring - HVAC-specific Application Macros: Pump, Fan, Constant Pressure, Constant Flow - Dual Independent PID Controllers with cascade control capability - PID Sleep/Wake Function with configurable hysteresis - Automatic Pump Alternation (with optional I/O expansion) - Flying Start and Catch a Spinning Motor function - Motor preheating function for humid environments Input/Output Configuration Digital Inputs: 4 programmable (24V DC, PNP/NPN selectable) Analog Inputs: 2 (AI1: 0-10V/0-20mA, AI2: 0-10V/0-20mA/PT1000) Analog Output: 1 (0/4-20mA or 0-10V configurable) Relay Outputs: 2 programmable (RA01: 30V DC/250V AC, 2A; RA02: 30V DC/250V AC, 2A) Additional: PTC thermistor input for direct motor temperature monitoring Communication Interfaces Built-in: - BACnet MS/TP (Standard protocol for building automation) - Modbus RTU (RS-485) Optional Fieldbus: - Profibus DP - LonWorks - Ethernet/IP - Modbus TCP/IP (via optional adapters) Protection Features Motor Protection: - I²t thermal overload protection - Motor stall prevention - Phase imbalance protection - Earth fault detection Drive Protection:0.98) - Adaptive current limit - Standby mode with automatic wake-up - Energy consumption monitoring (kWh counter) Cooling System Forced air cooling with temperature-controlled fan Environmental Specifications Operating Temperature: -15°C to +50°C (5°F to 122°F) without derating Storage Temperature: -40°C to +70°C (-40°F to 158°F) Relative Humidity: 5% to 95% non-condensing Altitude: Up to 1000m without derating (1% derating per 100m above 1000m) Vibration: 1.0G maximum (5-200 Hz) Pollution Degree: 2 according to IEC 60664 Electrical Standards & Approvals Compliance: - CE marked - cULus Listed (UL508C) - RoHS compliant - Complies with EN/IEC 61800-3 (EMC) - Meets EN 55011 Class A (Emissions) - IEC 61800-5-1 (Safety) Physical Dimensions Height: 247 mm (9.72 in) Width: 140 mm (5.51 in) Depth: 177 mm (6.97 in) Weight: Approximately 3.2 kg (7.05 lb)