Specifications Power Characteristics: Input Supply: 200-240V AC, 3-phase, 47-63 Hz Rated Output Current: 1.7 A continuous (at 240V, 40°C ambient) Overload Capability: 110% for 1 minute every 10 minutes Starting Current: Limited to drive rating (soft start capability) Output Frequency Range: 0-500 Hz Carrier Frequency: 1-12 kHz (adjustable to reduce motor noise) Motor Compatibility: Motor Power Ratings: 0.75 kW (1.0 HP) at 200V AC 1.1 kW (1.5 HP) at 240V AC Motor Types: Standard 3-phase asynchronous squirrel-cage motors Maximum Cable Length: 150 m without output filter (shielded cable recommended) Physical & Mechanical Specifications Parameter Specification Enclosure Rating IP21 (indoor use, protection against finger contact and vertically falling water) Dimensions (H×W×D) 190 × 93 × 147 mm (7.5 × 3.7 × 5.8 in) Weight 1.8 kg (4.0 lbs) Cooling Method Natural convection (fanless design) Mounting Wall or chassis mounting (vertical orientation recommended) Ambient Temperature -15°C to +40°C (full rating) 40°C to 50°C (with derating: 1.5% per °C) Storage Temperature -40°C to +70°C Relative Humidity 5-95% (non-condensing) Altitude Up to 1000 m without derating Pollution Degree 2 (normal industrial environment) Control & I/O Capabilities Standard I/O Configuration: Digital Inputs: 3 programmable (24V DC, PNP/NPN selectable) Configurable for start/stop, direction, preset speeds, etc. Digital Output: 1 relay (changeover contact) Rating: 250V AC/30V DC, 2A maximum Configurable for ready, running, fault, alarm signals Analog Input: 1 configurable (software-selectable) 0-10V DC or 0-20 mA (12-bit resolution) Can be used as speed reference or PID feedback Analog Output: 1 programmable (0-20 mA) Can be configured for speed, current, torque, etc. Built-in Potentiometer: Integrated 1 kΩ, 10-turn pot on control panel Control Features: Control Modes: Voltage/Frequency (V/Hz) control with ECO mode Square-law characteristic for fan applications Direct Torque Control (DTC) optionally available Application Macros: ABB Standard (factory default) 3-Wire Control Hand/Auto Control PID Control Torque Control