Parameter Category Specification General Model Information Product Line Eaton XTION Motor Management System Model Number PDC3XROP220ADN Description Dynamic Power Controller Module, 3-Phase, 220V AC Supply, Advanced License Type Digital controller module with licensed software features. Core Function Monitors and controls the total apparent power (kVA), active power (kW), or current of a group of XTION-controlled loads to stay below a setpoint. Power Supply Control Voltage (Us) 220V AC (Nominal). Common range: 85-264V AC, 50/60 Hz. (Must verify with exact datasheet) Power Consumption Typically low (e.g., < 15 VA). Licensing & Features License Level Advanced (ADN). This enables: • Dynamic Power Control (DPC) with configurable setpoints and limits. • "Stop" and "Hold" Control Modes: Can command connected starters to stop or hold based on priority. • 8 Configurable Load Groups: For complex prioritization strategies. • Extended Monitoring & Logging. Hardware & Physical Mounting Standard 35mm DIN Rail (EN 60715). Communication Interface Dedicated cable connection to a PDC Manager (PDM3...) unit. The Manager handles communication with the XTION starters. Ambient Temperature Operation: -25°C to +60°C (typical for electronic controllers). Storage: -40°C to +85°C. Protection Rating (IP) IP20 (for installation inside a protected enclosure). Control & Performance Controllable Units Works in conjunction with a PDC Manager, which can manage up to 12 XTION units (starters/soft starters). Control Modes • Limit (Priority-Based): Starts/Stops lower priority loads to keep total under limit. • Stop: Commands a stop to selected loads. • Hold: Places a start command for a selected load on hold. Measurement Inputs Receives 3-phase power data (Voltage, Current, Power) from the PDC Manager unit. Setpoint Configuration User-configurable via software (e.g., Eaton EASYsoft or other configuration tools connected to the PDC Manager/XTION network). Standards & Approvals Standards Compliance IEC/EN 60947-4-2 (Automatic electrical controls for AC semiconductor motor controllers and starters), CE marked, UL listed (verify for specific model). Key Application Benefits 1. Cost Savings: Reduces peak demand charges from utility companies. 2. Asset Protection: Prevents overload of power sources (gensets, transformers). 3. Operational Reliability: Ensures critical/high-priority motors always have power to start. 4. Easy Integration: Seamless setup within the Eaton XTION ecosystem.