Parameter Category Specification General Information Product Series Eaton MVX9000 (M-Max Series) Article Number / Model MMX34AA3D3F0-0 Type Industrial High-Performance AC Drive Enclosure Rating IP20 / UL Type 1 (Open Chassis) Standards Compliance cULus, CE, RoHS, IEC/EN 61800-5-1 Power Characteristics Rated Output Power 7.5 kW (Derived from "34" frame code, representing 7.5kW/10HP chassis) Output Horsepower (HP) 10 HP Input Supply (Line) 3-Phase, 380-480V AC (+10%/-15%), 50/60 Hz Output to Motor 3-Phase, 0-480V AC (corresponding to input), 0-400 Hz Rated Output Current 15 A (Note: Lower amperage than 230V model due to higher voltage) Overload Capacity 150% of rated current for 60 seconds (Standard torque) 160% for 60 seconds (High overload option, if applicable) Control & Performance Control Methods Flux Vector Control (Sensorless), Enhanced V/f, Closed Loop Vector (with encoder card) Control Performance 1:200 Speed Control Range (Sensorless Vector) 0.5% Speed Regulation (Rated slip compensation) 200% Starting Torque at 0.5 Hz (Sensorless Vector) Frequency Reference Sources Analog Input (0-10V, 4-20mA), Digital Presets, Modbus, Pulse Train Input, Keypad Command Sources Digital I/O, Serial Communication, Keypad Standard I/O • Digital Inputs: 4 (Programmable, 24V DC sink/source) • Digital Output: 1 (Open Collector, 24V DC 50mA) • Relay Output: 1 (Programmable, 250V AC/30V DC 2A) • Analog Input: 1 (0-10V/0-20mA software selectable) • Analog Output: 1 (0-10V) • Pulse Train Input: 1 (Optional/standard depending on variant) Communication Ports • RS-485 (Modbus RTU) - Standard • Expansion Slot for: PROFIBUS-DP, DeviceNet, EtherNet/IP, PROFINET, Modbus TCP/IP Switching Frequency Adjustable 2-16 kHz (Auto-reduction at high temperature) Key Features • Advanced Auto-Tuning (Rotary & Static) • Dynamic Braking Transistor (Standard) • DC Injection Braking • PID with Dual Sets • Flying Start • Power Loss Ride-Through (2 seconds typical) • Motor Overload Protection (Separate for main & auxiliary motors) • STO (Safe Torque Off) Ready (with optional safety card) Motor & Protection Suitable Motor Three-Phase Induction Motor, 7.5kW / 10HP @ 400V Protection Features Overcurrent (OC), Short Circuit (SC), Ground Fault (GF), Overvoltage (OV), Undervoltage (UV), Phase Loss, Overtemperature, Motor Overload, Stall Prevention, Fan Failure, Memory Error Physical & Environmental Mounting Panel Mount (Wall or Backplate) Dimensions (W x H x D) Approx. 155 x 280 x 205 mm (Frame D dimensions - 必须验证) Weight Approx. 4.5 kg Ambient Temperature -10°C to +50°C (40°C for full rating, derate linearly to 50°C) Storage Temperature -40°C to +70°C Relative Humidity < 95% RH (non-condensing) Altitude < 1000 m (1.0 p.u.), derate 1% per 100 m above 1000 m Vibration 5.9 m/s² (0.6 G) max