Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC FOXBORO GE HIMA Honey Well ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW TRICONEX Schenider Weidmueller Mitsubishi SICK FISHER
home
1CE30F-35-S-5

The Eaton 1CE30F-35-S-5 is a spool valve controlled, low-speed high-torque (LSHT) hydraulic motor from the renowned Char-Lynn® 1CE series. It utilizes Eaton's patented Geroler® mechanism (a combination of gerotor and roller elements), renowned for its high starting and running torque, smooth operation, durability, and compact design.

open
TEL：+86 13600179521
Mail：info@hongkongeasy.com
info@hongkongeasy.com
WhatsApp
Parameters
Request a Quote
Return to List
Parameter Specification / Description Manufacturer & Model Eaton Char-Lynn® 1CE30F-35-S-5 Motor Series 1CE (Spool Valve, Medium-High Pressure Series) Displacement 35 cubic inches per revolution (cu in/rev) [~573 cc/rev] Valve Type S - Rotating Spool Valve Shaft Designation 5 - Specific Output Shaft Type (Requires drawing for exact geometry: e.g., single keyed, spline, etc.) Operating Pressure - Continuous Up to 3,000 psi (207 bar) Operating Pressure - Intermittent Up to 3,500 psi (241 bar) Speed Range Recommended: Up to 600 rpm (Consult performance curves for specific torque/power at speed). Maximum: Higher speeds possible but with reduced torque and life. Maximum Torque (Theoretical @ 3000 psi) Theoretical Running Torque: ~ 1,670 lb-in @ 3000 psi Theoretical Starting Torque: Typically ≥ 90% of running torque due to Geroler® design. Maximum Recommended Input Flow ~ 21 US gpm (80 l/min) at 600 rpm (Theoretical) Volumetric Efficiency Typically > 90% under optimal conditions (varies with speed, pressure, fluid). Overall Efficiency Typically > 85% at rated conditions. Port Size & Thread Typically 3/4"-16 SAE Straight Thread (O-ring seal) Shaft Seal Standard: Lip seal. Options for high-pressure shaft seals available. Rotation Bi-directional (Port A or B as inlet determines direction). Housing Material Cast Iron Mounting Foot mount or flange mount options, depending on configuration. Bolt pattern defined by series. Drain Port (Case Drain) Recommended for closed-loop circuits or high-case pressure applications. Usually 1/2"-20 SAE thread. Weight (Approx.) ~ 30 lbs (13.6 kg) (Varies with shaft option)