Products
Products
ABB Allen-Bradley ADEPT Alfa Laval
All Categories
ALSTOM AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC FOXBORO GE HIMA Honey Well ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW TRICONEX Schenider Weidmueller Mitsubishi SICK FISHER
home
UM33A-000-10

The Yokogawa UM33A-000-10 is a single-channel Digital Panel Indicator from the UM33A series. Its primary function is to accept a standard analog input signal (from a transmitter, sensor, or signal conditioner) and accurately display the measured value on a high-visibility, 5-digit LED display.

open
TEL：+86 13600179521
Mail：info@hongkongeasy.com
info@hongkongeasy.com
WhatsApp
Parameters
Request a Quote
Return to List
Key Specifications
Category Specification Details
Model UM33A-000-10
Input Type: Universal, user-configurable
DC Voltage: 0-10 V, 0-5 V, 1-5 V, ±10 V, etc.
DC Current: 4-20 mA, 0-20 mA, 0-10 mA, etc. (via internal shunt resistor)
Thermocouple (TC): Types K, J, T, E, R, S, B, N, L, U, W
RTD: Pt100 (JIS, IEC, DIN), JPt100
Minimum Span: 1 mV, 1 µA, or 1°C
Display Type: 5-digit, red LED (0.36" or 0.56" digit height)
Update Rate: Approximately 4 times per second
Decimal Point: Position is user-selectable
Scaling: Full-scale value and decimal point are user-configurable
General Performance Accuracy (DC Voltage/Current): ±0.1% of reading ±1 digit
Accuracy (Temperature): Varies by sensor type (e.g., ±1°C for Type K T/C)
Temperature Effect: ±0.01% of reading per °C (for voltage/current)
Common Mode Rejection Ratio (CMRR): 120 dB min.
Normal Mode Rejection Ratio (NMRR): 60 dB min. (at 50/60 Hz)
Power Supply Rated Voltage: 24 V DC ±10%
Rated Voltage (AC option): 100-240 V AC ±10%, 50/60 Hz (Note: Verify model suffix for AC power)
Power Consumption: Approx. 2.5 W (for DC model)
Environmental Conditions Operating Temperature: 0 to +50 °C (32 to 122 °F)
Storage Temperature: -20 to +60 °C (-4 to +140 °F)
Ambient Humidity: 5 to 95% RH (non-condensing)
Construction & Design Panel Cutout: 92mm (H) x 45mm (W) / 3.62" (H) x 1.77" (W)
Mounting: Front-panel mounting with securing clips
Case Material: Plastic (ABS resin)
Weight: Approx. 200 g (0.44 lbs)
Safety & Compliance Standards: Complies with EN 61010-1 (Safety), EN 61326-1 (EMC).