Products
Products
ABB Allen-Bradley ADEPT Alfa Laval
All Categories
ALSTOM AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC FOXBORO GE HIMA Honey Well ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW TRICONEX Schenider Weidmueller Mitsubishi SICK FISHER
home
UT35A-000-10-00

The Yokogawa UT35A-000-10-00 is a Digital Indicating Controller from the compact UTAdvanced series. This model is a versatile and cost-effective solution designed for basic process control applications where the input is a standard analog current signal and the output requires simple relay-based actuation.

open
TEL：+86 13600179521
Mail：info@hongkongeasy.com
info@hongkongeasy.com
WhatsApp
Parameters
Request a Quote
Return to List
Detailed Specifications Table
Category Specification
Model Code UT35A-000-10-00
Input Type Universal Analog Input (Default: 4-20mA)
• DC Current: 4 to 20 mA (default), 0 to 20 mA, etc.
• Note: Capability for voltage input may be available via software configuration, but the hardware is optimized for current loop.
Display • Type: High-brightness Red LED
• Primary Display (PV): 4-digit, 0.36" (9.2mm) height
• Secondary Display (SV): 4-digit, 0.36" (9.2mm) height
Control Output -10-: 1 point of Relay Output
• Type: SPST-NO (Single Pole, Single Throw - Normally Open)
• Contact Rating: 250V AC, 3A (resistive load)
• Function: Used for main control (ON/OFF or PID).
Alarm Output None (This model has only one relay, used for control).
Communication -00: None
• This model does not have a built-in communication port.
Power Supply 100 to 240 V AC (+10%, -15%), 50/60 Hz
Power Consumption Approx. 6 VA max
Accuracy ±0.3% of span ±1 digit
Sampling Period 200 ms
Control Action ON/OFF, Standard PID (with auto-tuning)
Electrical Isolation • Input: Photocoupler isolation
• Output Relay: Between coil and contact
• Power: Between power supply and all other terminals
Ambient Temperature 0 to 50°C (32 to 122°F)
Ambient Humidity 5 to 95% RH (non-condensing)
Installation • Panel Cutout: 45.5 x 45.5 mm (1.79" x 1.79")
• Panel Thickness: 1 to 10 mm (0.04" to 0.39")
• Standard: DIN 48x48mm
Weight Approx. 200 g (0.44 lbs)