Products
Products
ABB Allen-Bradley ADEPT Alfa Laval
All Categories
ALSTOM AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC FOXBORO GE HIMA Honey Well ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW TRICONEX Schenider Weidmueller Mitsubishi SICK FISHER
home
UR1060b8KC

The Yokogawa UR1060b8KC is a high-performance, single-loop Controller / Programmable Indicator from the UTAdvanced series. It is designed for DIN rail mounting and serves as a versatile core unit for panel-mounted control and monitoring applications.

open
TEL：+86 13600179521
Mail：info@hongkongeasy.com
info@hongkongeasy.com
WhatsApp
Parameters
Request a Quote
Return to List
Key Parameters:
| Category | Specification |
| ：--- | :--- |
| Series | Yokogawa "U" or "UM" Series (Older Generation) |
| Function | Thermocouple Isolator & Converter |
| Input Signal | Thermocouple, Type K |
| Input Range | Standard K-type range (e.g., 0 to 1300°C / 32 to 2372°F). Exact range should be verified. |
| Output Signal | Analog, 4 to 20 mA DC (isolated) |
| Load Resistance | Maximum 550 Ω (at 20 mA) |
| Power Supply | 100 - 240V AC, 50/60 Hz |
| Isolation | Input-Output-Power: 500V AC or 1500V AC (typical for these models). |
| Accuracy | Typically ±0.2% of span |
| Cold Junction Compensation (CJC) | Built-in, for accurate thermocouple temperature measurement. |
| Operating Temperature | 0 to +55°C (32 to 131°F) |
| Mounting | Standard DIN rail (35mm) |
| Configuration | Fixed range; typically configured via internal DIP switches or jumpers (if any configuration is available). |
| Status Indicators | LED for power status. |

Typical Application
This module is a classic temperature transmitter:

Input: A K-type thermocouple is connected to the input terminals, measuring temperature in a furnace, reactor, or pipe.

Processing: The conditioner isolates the millivolt signal, performs Cold Junction Compensation, and linearizes it.

Output: A proportional 4-20 mA signal is generated. For example, 4 mA might represent 0°C and 20 mA represents 1300°C.

Destination: This 4-20 mA signal is sent to a PLC or control system for monitoring, recording, or control.