Products
Products
home
DBS50E-S5EN00200

The SICK DBS50E-S5EN00200 is a high-resolution, bearingless absolute encoder from the DBS50 series. It is designed to provide precise rotational position and speed feedback by utilizing the existing bearings of a machine's shaft, eliminating the need for its own internal bearings and thus avoiding a common point of failure.

open
TEL:+86 13600179521
Mail:info@hongkongeasy.com
info@hongkongeasy.com
WhatsApp
Parameters
Request a Quote
Return to List
Key Parameters Parameter Category Parameter Specification for DBS50E-S5EN00200
General Data Article Number DBS50E-S5EN00200
Encoder Type Bearingless, Absolute, Single-Turn
Functional Principle Magnetic, Non-Contact
Mechanical Data Internal Diameter (I.D.) 20 mm (Key specification of the -S5EN00200 variant)
Housing Material Metal
Magnetic Ring Material Plastic-bound permanent magnet
Mounting Stationary sensor head, magnetic ring mounted on target shaft
Operating Air Gap Critical; typically 0.4 mm ± 0.1 mm (refer to datasheet)
Protection Class IP67
Shock Resistance 1000 m/s², 6 ms (according to EN 60068-2-27)
Vibration Resistance 200 m/s², 10...2000 Hz (according to EN 60068-2-6)
Electrical Data Supply Voltage 3.6 VDC ... 5.5 VDC (Typical for EnDat 2.2)
Current Consumption Typically < 140 mA (without load)
Output Interface EnDat 2.2 (Bidirectional, digital)
Resolution Up to 24 Bit Single-Turn
Data Transmission Absolute position, plus parameter & diagnostic data
Clock Frequency High (e.g., up to 8 MHz)
Signal Level Differential (RS-485) for high noise immunity
Reverse Polarity Protection Yes
Environmental Data Operating Temperature -20 °C ... +85 °C (Note: Magnetic ring max. +100 °C)
Storage Temperature -30 °C ... +100 °C
Relative Humidity 95%, non-condensing