General Information
Manufacturer: B&R Industrial Automation

Model Number: X20CP0410

Module Type: Compact Power Supply Module

Series: X20 System

Width: 45mm (triple-width X20 module)

Mounting: X20 System rail (DIN EN 50022)

Electrical Parameters
Input Specifications
Parameter Specification
Input Voltage Range 100–240V AC (±10%)
Frequency Range 47–63Hz
Input Current 1.2A @ 120V AC / 0.6A @ 240V AC
Inrush Current 20A (typical, cold start)
Efficiency >90% (typical at full load)
Output Specifications
Parameter Specification
Output Voltage 24V DC (±1%)
Output Current 10A continuous (up to 40°C)
Power Rating 240W
Ripple & Noise <150mVpp (20MHz bandwidth)
Overload Capacity 110% for 60s / 150% for 5s
Protection Features
Overvoltage Protection: 28V DC (auto shutdown)

Short-Circuit Protection: Hiccup mode (auto-recovery)

Over-Temperature Protection: Thermal shutdown with auto-reset

Mechanical & Environmental Specs
Parameter Specification
Dimensions (W×H×D) 45 × 100 × 64 mm
Weight ~400g
Connection Screw terminals (0.5–4mm² / AWG 20–12)
Cooling Natural convection (fanless)
Operating Temp. -25°C to +60°C (derating above 40°C)
Storage Temp. -40°C to +85°C
Humidity 5–95% (non-condensing)
Protection Class IP20
Functional Features
✔ Wide-range AC input (100–240V AC)
✔ Active PFC (Power Factor Correction) >0.95
✔ Status Indicators: LED for power/error/fault
✔ Redundant Operation: Parallel capability for N+1 redundancy
✔ Hot-Swappable: Supports live replacement in X20 systems

Certifications & Compliance
Safety: UL 61010-1, EN 62368-1

EMC: EN 61000-6-2 (immunity), EN 61000-6-4 (emissions)

Standards: IEC 61131, RoHS, CE, cULus

Ordering Information
Base Model: X20CP0410

Accessories:

Terminal covers (X20 ACC-TC)

Redundancy kit (X20 RDK-24V10A)

Typical Applications
Industrial PLC power backbones

Motion control systems

Robotic cell power distribution

Packaging machinery

Note: For derating curves and parallel operation guidelines, refer to B&R X20 System Manual (BRP9400). Specifications subject to change with hardware revisions.